You are here:
SKU: 80173-110-02-R

Allen Bradley 80173-110-02-R Thyristor Board Pcb

The Allen Bradley 80173-110-02-R, also cataloged as the 80173-110-02-R Thyristor Board Pcb, operates as a dedicated hardware component for power regulation and phase control within industrial automation drive platforms.

Hardware Specifications

ParameterSpecification
Model80173-110-02-R
BrandAllen Bradley
OriginUSA
Weight1.56 kg
Dimensions29.2 x 20.7 x 5.5 cm
Operating Temp0 deg C to 60 deg C
Power ConsumptionNominal 15 W gate trigger and logic dissipation

Profinet / EtherNet/IP Deterministic Networks

The printed circuit assembly interfaces with control logic circuits to execute deterministic gating signals for high-power semiconductor devices. Synchronization circuits track incoming line frequencies to maintain precise firing angle adjustments, supporting deterministic phase control loops across industrial power conversion networks.

Frequently Asked Questions

Q: What precautions are required during board replacement?

A: Ensure complete de-energization and discharge of intermediate DC bus capacitors prior to handling the printed circuit board to prevent electrical shock or component damage.

Q: How are gate trigger signals verified?

A: Gate firing pulses can be monitored via designated test points using an isolated oscilloscope probe referenced to the designated common circuit ground.

Q: Is firmware flashing required upon replacement?

A: This hardware layer functions via hardwired gate driver logic and does not require field firmware flashing upon direct hardware substitution.

Field Installation Guidelines

Mount the printed circuit board within the designated cabinet rack or drive housing using nylon standoffs and grounding screws to ensure proper chassis potential bonding. Inspect all edge connectors for oxidation or debris prior to insertion. Route gate control wiring away from high-voltage power cables to minimize electromagnetic coupling and signal distortion. Verify correct torque values on all screw terminals to maintain low-resistance power and control connections.