The Bently Nevada 16925-99 is a high-quality 6-conductor interconnect cable featuring three twisted pairs and 24 AWG wiring. It offers 300V protection and extreme temperature resistance for industrial vibration monitoring.
The Bently Nevada 16925-99 serves as a critical link in industrial condition monitoring networks. This interconnect cable facilitates the transmission of high-fidelity vibration and position signals. It connects proximity sensors to remote monitoring hardware or junction boxes. Because it maintains precise electrical properties, it prevents data loss during signal transit. This ensures that protection systems receive accurate information from rotating machinery.
Engineers designed this cable with six total conductors organized into three twisted pairs. This internal configuration effectively cancels out electromagnetic noise and external interference. The 24 AWG wire gauge provides a balance between physical flexibility and electrical conductivity. Furthermore, the cable maintains a characteristic impedance of 100 Ω with a tight ±10% tolerance. Low pair-to-pair capacitance further protects signal quality over extended installation distances.
This cable withstands the rigorous conditions typical of power plants and refineries. The robust outer jacket tolerates extreme temperatures ranging from -40°C to +120°C. Additionally, the assembly supports a maximum voltage rating of 300 V AC/DC for versatile deployment. Its lightweight 0.06 kg construction allows for easy routing through narrow conduit paths. This durability reduces maintenance costs by extending the lifespan of the transducer system.
Standard monitoring architectures rely on this cable for its consistent performance and reliability. It integrates seamlessly with Bently Nevada Turbine Static Instrumentation (TSI) systems. Moreover, the cable supports predictive maintenance by ensuring clean signal paths for analytical software. The 16925-99 model represents a standard for field-proven connectivity in hazardous and high-temperature areas.
| Attribute | Specification |
| Manufacturer | Bently Nevada |
| Model Number | 16925-99 |
| Product Type | Interconnect Cable |
| Conductor Count | 6 (3 Twisted Pairs) |
| Wire Gauge | 24 AWG |
| Impedance | 100 Ω ±10% |
| Voltage Rating | 300 V AC/DC |
| Operating Temperature | -40°C to +120°C |
| Weight | 0.06 kg |
The Bently Nevada 16710-33 is a multi-conductor, shielded interconnect cable designed for high-fidelity signal transmission within the 3500 Machinery Protection System. Its primary function is to provide a reliable electrical connection between a 3500 series I/O module and its associated external or internal termination blocks. This specific cable, with a length of 1.0 meter (3.3 feet), is critical for routing low-level analog signals from machinery sensors, such as proximity probes or accelerometers, to the monitoring modules for processing. The construction of the 16710-33 incorporates robust shielding to reject electromagnetic interference (EMI) and radio-frequency interference (RFI), ensuring high signal integrity, which is paramount for accurate vibration, position, and speed measurements. One end features a high-density D-subminiature connector for secure attachment to the I/O module, while the other end is configured for connection to the system's terminal strips. The precise engineering of the 16710-33 ensures that the signal characteristics are preserved throughout the measurement chain, enabling the 3500 system to perform its protective and diagnostic functions with maximum accuracy and reliability.
| Parameter | Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Part Number | 16710-33 |
| Product Type | Interconnect Cable |
| Condition | Brand New |
| Warranty | 12 Months |
| Cable Length | 1.0 meter (3.3 feet) |
| Connector A | Female D-subminiature (DB-type) for 3500 I/O Module |
| Connector B | Pigtail with pre-stripped conductors for terminal block connection |
| Shielding | Overall aluminum/Mylar foil shield with drain wire for EMI/RFI rejection |
| Conductor Gauge | 22 AWG, stranded tinned copper |
| Operating Temperature | -30°C to +100°C (-22°F to +212°F) |
| Jacket Material | Industrial Grade PVC, Gray |
In Oil & Gas and Power Generation applications, the 16710-33 interconnect cable demonstrates high reliability in continuous-duty environments. Its robust construction is engineered to withstand the typical ambient conditions of a plant floor, including moderate vibration and wide temperature swings as specified by its -30°C to +100°C operating range. The cable's performance is defined by its ability to maintain signal integrity for critical measurements on assets like gas and steam turbines, centrifugal and reciprocating compressors, and large pump systems. The multi-layer shielding is effective in mitigating electrical noise from variable frequency drives (VFDs), motors, and high-voltage lines, preventing signal corruption that could lead to false alarms or missed protection events. The design focuses on long-term stability, with high-quality connectors and strain relief that prevent intermittent connections, a common failure point in industrial settings. The 16710-33 is an integral component in achieving the high Mean Time Between Failure (MTBF) rates expected from a SIL-rated machinery protection system.
Q: What systems is the 16710-33 compatible with?
A: The 16710-33 is specifically designed for use with the Bently Nevada 3500 Machinery Protection System. It is used to connect various 3500 I/O modules, such as the 3500/40M Proximitor Monitor, 3500/42M Proximitor/Seismic Monitor, and 3500/45 Position Monitor, to their corresponding external termination blocks (e.g., 3500/25 Keyphasor I/O, 3500/40 External Termination Block) or internal termination I/O modules. Compatibility is dependent on the specific I/O module and termination type being used in the 3500 rack configuration.
Q: What are the installation requirements?
A: Proper installation is critical for system performance. First, ensure all power to the 3500 rack is de-energized before installation. Securely fasten the D-sub connector of the 16710-33 to the rear of the designated I/O module using the integrated jackscrews. Route the cable through designated cable trays, avoiding sharp bends (maintain a minimum bend radius of 10x the cable diameter), pinch points, and proximity to high-voltage power cables to prevent physical damage and noise induction. Land the pre-stripped conductors of the pigtail end onto the correct terminals of the associated terminal block, following the wiring diagram specific to the monitor and transducer type. Ensure proper strain relief is applied to the cable at both ends. The cable's shield drain wire must be terminated correctly, typically at the rack chassis ground terminal only, to prevent ground loops per Bently Nevada system grounding guidelines.
The Bently Nevada 89477-33 is a genuine Interconnect Cable designed for industrial automation systems. This high-quality component delivers reliable performance in demanding industrial environments.
Engineered to integrate seamlessly with Bently Nevada monitoring systems, it provides accurate data collection and monitoring capabilities essential for predictive maintenance and machinery protection.
| Parameter | Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Part Number | 89477-33 |
| Product Type | Interconnect Cable |
| Condition | Brand New |
| Warranty | 12 Months |
Q: Is this a genuine Bently Nevada product?
A: Yes, this is a 100% genuine Bently Nevada product with full manufacturer warranty.
Q: What is the warranty period?
A: All products come with a standard 12-month warranty.
The Bently Nevada 330707-00-62-10-01-00 is a genuine 3300 XL 11mm Probe designed for industrial automation systems. This high-quality component delivers reliable performance in demanding industrial environments.
Engineered to integrate seamlessly with Bently Nevada monitoring systems, it provides accurate data collection and monitoring capabilities essential for predictive maintenance and machinery protection.
| Parameter | Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Part Number | 330707-00-62-10-01-00 |
| Product Type | 3300 XL 11mm Probe |
| Condition | Brand New |
| Warranty | 12 Months |
Q: Is this a genuine Bently Nevada product?
A: Yes, this is a 100% genuine Bently Nevada product with full manufacturer warranty.
Q: What is the warranty period?
A: All products come with a standard 12-month warranty.
The Bently Nevada 89477-10 is a genuine industrial automation component designed for reliable operation in demanding environments. This high-quality product ensures optimal performance and long-term durability for critical machinery protection systems.
| Parameter | Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Part Number | 89477-10 |
| Condition | Brand New |
| Warranty | 12 Months |
This Bently Nevada 89477-10 component delivers consistent performance in harsh industrial environments. It is engineered for seamless integration with Bently Nevada monitoring systems, ensuring accurate data collection for predictive maintenance and operational efficiency.
Q: Is this an authentic Bently Nevada product?
A: Yes, this is a 100% genuine Bently Nevada product with full manufacturer warranty.
Q: What warranty is included?
A: All products include a standard 12-month warranty with comprehensive technical support.
The Bently Nevada 16925-50 is a genuine industrial automation component designed for reliable operation in demanding environments. This high-quality product ensures optimal performance and long-term durability for critical machinery protection systems.
| Parameter | Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Part Number | 16925-50 |
| Condition | Brand New |
| Warranty | 12 Months |
This Bently Nevada 16925-50 component delivers consistent performance in harsh industrial environments. It is engineered for seamless integration with Bently Nevada monitoring systems, ensuring accurate data collection for predictive maintenance and operational efficiency.
Q: Is this an authentic Bently Nevada product?
A: Yes, this is a 100% genuine Bently Nevada product with full manufacturer warranty.
Q: What warranty is included?
A: All products include a standard 12-month warranty with comprehensive technical support.
The Bently Nevada 84661-15 is a genuine industrial automation component designed for reliable operation in demanding environments. This high-quality product ensures optimal performance and long-term durability for critical machinery protection systems.
| Parameter | Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Part Number | 84661-15 |
| Condition | Brand New |
| Warranty | 12 Months |
This Bently Nevada 84661-15 component delivers consistent performance in harsh industrial environments. It is engineered for seamless integration with Bently Nevada monitoring systems, ensuring accurate data collection for predictive maintenance and operational efficiency.
Q: Is this an authentic Bently Nevada product?
A: Yes, this is a 100% genuine Bently Nevada product with full manufacturer warranty.
Q: What warranty is included?
A: All products include a standard 12-month warranty with comprehensive technical support.
We are committed to protecting your privacy. The information collected here is strictly used to provide the requested quotes, technical support, and relevant industrial automation solutions.