You are here:
- Home
- Product
- Sensors & Probes
- Transducers
- ICS Triplex T8310C Trusted Expander Module
SKU: T8310C
ICS Triplex T8310C Trusted Expander Module
The ICS Triplex T8310C is a high-integrity Trusted Expander Module designed to scale SIL 3 TMR safety systems. It provides a fault-tolerant communication link between the main controller and expansion I/O racks, ensuring seamless data synchronization and robust galvanic isolation. This TMR-compliant module is essential for extending I/O density in critical emergency shutdown and fire and gas applications.
Technical Functionality
The ICS Triplex T8310C functions as a high-integrity Trusted Expander Module designed to extend the backplane of the Trusted TMR (Triple Modular Redundant) safety system. This module serves as the critical communication bridge between the main controller chassis and remote or expansion I/O racks. By utilizing a high-speed, fault-tolerant interface, the T8310C transparently mirrors the system bus across multiple chassis. Consequently, it allows the safety controller to manage a significantly higher density of I/O points while maintaining the strict synchronization required for SIL 3 safety-critical logic.
Operational Performance
This expansion module delivers uncompromising reliability by adhering to the Triple Modular Redundant (TMR) architecture, ensuring that no single point of failure can disrupt the expansion link. Because it handles the “Trusted Expander Bus,” the T8310C incorporates sophisticated error-checking and galvanic isolation to protect against electrical disturbances between separate racks. Furthermore, the module facilitates hot-swappable maintenance, enabling users to replace expansion hardware without taking the entire safety system offline. Its active diagnostic suite continuously monitors the integrity of the expansion cables and internal hardware, reporting any signal degradation to the main Trusted controller immediately.
Key Technical Characteristics
- TMR Architecture:Â Fully integrates with the Triple Modular Redundant logic of the ICS Triplex Trusted system.
- Chassis Extension:Â Provides the physical and logical interface to connect expansion chassis to the main controller rack.
- SIL 3 Compliance:Â Engineered and certified for use in Safety Integrity Level 3 applications.
- Fault-Tolerant Link:Â Ensures continuous data synchronization even if one of the redundant expansion cables is compromised.
- High-Speed Throughput:Â Maintains low-latency communication across the expansion bus to support rapid safety-trip response times.
- Galvanic Isolation:Â Isolates separate equipment racks to prevent ground loops and protect against electromagnetic interference (EMI).
- Simplified Integration:Â Fits into dedicated expander slots in the Trusted chassis for a secure, screw-down installation.
Primary Industrial Applications
- Emergency Shutdown (ESD):Â Extending I/O capacity for large-scale shutdown systems in offshore oil platforms and refineries.
- Fire and Gas (F&G):Â Coordinating a high volume of flame and gas detectors across multiple remote equipment rooms.
- Burner Management (BMS):Â Providing the high-reliability interface needed for distributed boiler control in power plants.
- Critical Process Control:Â Managing complex safety interlocking in large chemical processing facilities.
Technical Specifications
- Manufacturer:Â ICS Triplex (Rockwell Automation)
- Model Number:Â T8310C
- Product Series:Â Trusted TMR
- Module Type:Â Expander / Interface Module
- Safety Rating:Â SIL 3
- Communication:Â Trusted Expander Bus
- Operating Temperature: -5°C to +60°C
- Weight:Â 1.15 kg
Tags: Trusted Expander Module
You may also like
The Bently Nevada 330881-16-00-180-03-02 PROXPAC XL is an integrated proximity transducer assembly. It combines a 3300 XL Proximitor sensor and probe into one unit, providing precise vibration and position data for Turbine Supervisory Instrumentation (TSI) systems
Bently Nevada 190501-10-00-00 Velomitor CT Velocity Transducer
The Bently Nevada 190501-10-00-00 is a rugged Velomitor CT velocity transducer designed for cooling tower machinery. Featuring a stainless steel housing and a frequency range of 1.5 Hz to 1.0 kHz, it provides reliable vibration monitoring in high-humidity environments.
Bently Nevada 990-04-50-01-00 Vibration Transmitter
The Bently Nevada 990-04-50-01-00 is a loop-powered 990 series vibration transmitter. It provides a 4-20 mA output for centrifugal machinery protection and works with 3300 XL 8mm proximity probes.
Bently Nevada 330104-00-12-10-02-05 Proximity Transducer
The Bently Nevada 330104-00-12-10-02-05 is a 3300 XL 8mm proximity transducer with 120mm metric threads and a 1.0m cable. It provides non-contact vibration and position monitoring for critical rotating assets.
ICS Triplex T8310 Trusted Expander Processor
The ICS Triplex T8310 is a TMR Expander Processor for the Trusted system. It features dual ARM Cortex-A9 processors and 2GB RAM to provide fault-tolerant chassis expansion for critical safety applications.
Bently Nevada 9200-01-05-10-00 Velocity Seismoprobe Transducer
The Bently Nevada 9200-01-05-10-00 is a self-generating velocity seismoprobe transducer designed for monitoring large rotating machinery. Featuring moving-coil technology and a rugged anodized aluminum body, it provides reliable vibration data for turbines and compressors without the need for external power. Its 0-24V class signal and two-wire design ensure seamless integration into industrial condition monitoring systems.
Bently Nevada 991-01-XX-01-01 991 Thrust Transmitter MOD:284318-01
The Bently Nevada 991-01-XX-01-01 is a loop-powered 991 Thrust Transmitter featuring MOD:284318-01. It converts proximity probe signals into a 4-20 mA output for PLC/DCS integration, providing essential axial position monitoring and protection for rotating machinery.
Emerson Epro PR6424/000-000 CON021 Eddy Current Displacement Transducer
The Emerson PR6424/000-000 CON021 is a professional-grade 8mm eddy current transducer designed for non-contact displacement and vibration measurement. Ideal for monitoring turbines and compressors, this Epro series sensor provides high-accuracy data for predictive maintenance in harsh industrial environments.
Bently Nevada 330101-24-35-10-02-00 3300 XL 8mm Proximity Transducer
The Bently Nevada 330101-24-35-10-02-00 is a 3300 XL 8mm proximity transducer designed for high-precision vibration and position monitoring. This brand-new sensor offers non-contact measurement for critical rotating machinery, ensuring early fault detection and robust equipment protection in harsh industrial environments.
Bently Nevada 9200-02-01-10-00 Seismoprobe Velocity Transducer
The Bently Nevada 9200-02-01-10-00 is a self-generating Seismoprobe velocity transducer designed for absolute casing vibration monitoring. It features a vertical mounting orientation, 500 mV/in/s sensitivity, and a rugged stainless steel housing for reliable performance in power and industrial plants.
Bently Nevada 9200-06-05-10-00 Velocity Seismoprobe Transducer
The Bently Nevada 9200-06-05-10-00 is a self-generating velocity seismoprobe for casing vibration monitoring. It features a 20 mV/mm/s sensitivity and a 1/4-28 UNF mounting stud.
9200-06-02-10-00 | Bently Nevada | Two-wire Transducer
The Bently Nevada 9200-06-02-10-00 is a Two-wire Transducer (Seismoprobe Velocity Transducer) designed for rotating machinery vibration monitoring. Features self-generating moving-coil design with 4.5 Hz to 2 kHz frequency response, 0-5 in/s velocity range, and 20 mV/in/s sensitivity.


























