Hotline:

+8618059251527

About brand

FAQ

Contact

SKU: 330730-080-03-00

Bently Nevada 330730-080-03-00 3300 XL 11 mm Extension Cable

Technical Overview

The Bently Nevada 330730-080-03-00 is a genuine industrial component designed for reliable operation in demanding environments. This high-quality product ensures optimal performance and long-term durability.

Detailed Specifications

Manufacturer	Bently Nevada
Part Number	330730-080-03-00
Condition	Brand New
Warranty	12 Months

Applications

Power generation turbines
Oil & gas compressors
Industrial rotating machinery

Tags: 3300 XL 11 mm Extension Cable, Bently Nevada 3300 Proximity Transducer System

You may also like

330102-00-60-10-01-05 | Bently Nevada | 3300 XL 8 mm Proximity Probes — 330102-00-60-10-01-05 | Bently Nevada | 3300 XL 8 mm Proximity Probes
Technical Overview
The Bently Nevada 330102-00-60-10-01-05 is an 8 mm reverse-mount eddy current proximity probe designed for non-contact measurement of vibration and displacement. It functions as a core component of the 3300 XL 8 mm Proximity Transducer System, which also includes an extension cable and a Proximitor Sensor. The probe operates by having the Proximitor Sensor generate a high-frequency radio frequency (RF) signal, which is transmitted through the extension cable and radiated from the probe's tip into a small electromagnetic field. When a conductive target, such as a machine shaft, enters this field, eddy currents are induced on its surface. These currents create a secondary magnetic field that opposes the primary field, causing a measurable change in the RF signal's amplitude. This change is directly proportional to the gap between the probe tip and the target surface. The Proximitor Sensor demodulates this signal, converting it into a DC voltage that accurately represents the physical distance. This conditioned voltage signal is then transmitted to a monitoring system, such as the Bently Nevada 3500, for real-time analysis of radial vibration, axial position, and shaft speed.
Detailed Specifications
Parameter Specification
Manufacturer Bently Nevada
Part Number 330102-00-60-10-01-05
Product Type 3300 XL 8 mm Reverse Mount Proximity Probe
Condition Brand New
Warranty 12 Months
Total Length 1.0 meter (3.3 feet)
Case Length 6.0 inches (152 mm)
Mounting Option Reverse Mount
Connector Type Miniature coaxial ClickLoc™ connector, gold-plated
Probe Tip Material Polyphenylene Sulfide (PPS)
Probe Case Material AISI 304 Stainless Steel
Agency Approvals Multiple Approvals: CSA (Class I, Div 1/2), ATEX/IECEx (Zone 0/1)
Operational Capabilities
In Oil & Gas and Power Generation applications, the 330102-00-60-10-01-05 probe demonstrates high reliability in demanding operational environments. Its construction with a PPS tip and stainless steel case allows for continuous operation in temperatures ranging from -34 °C to +177 °C (-29 °F to +350 °F). The gold-plated ClickLoc connector provides a secure, corrosion-resistant connection that prevents signal degradation from fluid ingress or vibration-induced intermittence. When paired with a 3300 XL Proximitor Sensor, the system provides a linear measurement range of 2.0 mm (80 mils) with a scale factor of 7.87 V/mm (200 mV/mil), ensuring precise data for machine diagnostics. The system is designed for high immunity to radio frequency interference (RFI), minimizing signal corruption in electrically noisy industrial environments. The probe's physical durability and signal integrity are critical for monitoring high-speed turbomachinery, where accurate measurement of shaft dynamics is essential for preventing catastrophic failure.
Applications
Power generation turbines and generators
Oil & gas compressors and pumps
Industrial rotating machinery monitoring
Predictive maintenance systems
Process automation
Technical FAQ
Q: What systems is the 330102-00-60-10-01-05 compatible with?
A: The 330102-00-60-10-01-05 probe is a component of the 3300 XL 8 mm Transducer System. For proper operation, it must be used with a 3300 XL extension cable and a 3300 XL Proximitor Sensor (e.g., part number 330180). This complete transducer system is fully compatible with Bently Nevada monitoring systems, including the 3500 Series Machinery Protection System and ADRE Sxp/408 DSPi data acquisition systems. It is not electrically or mechanically compatible with components from other transducer series, such as the 7200 or 3000 series.
Q: What are the installation requirements?
A: As a reverse-mount probe, the 330102-00-60-10-01-05 is installed from inside the machine housing, with the probe body extending outward. A clearance hole must be drilled through the machine case to accommodate the 8 mm probe tip. The target area on the observed shaft must be smooth, free of surface defects, and have a minimum diameter of 10.7 mm (0.42 in) to ensure measurement accuracy. The probe's gap should be set to the center of its linear range, typically corresponding to -10.0 Vdc. The ClickLoc connector must be tightened to the specified torque to ensure a secure, environmentally sealed connection. Cable routing must avoid areas of extreme heat, physical abrasion, and proximity to high-voltage power lines to maintain signal integrity.

330102-00-60-10-01-05 | Bently Nevada | 3300 XL 8 mm Proximity Probes
Technical Overview
The Bently Nevada 330102-00-60-10-01-05 is an 8 mm reverse-mount eddy current proximity probe designed for non-contact measurement of vibration and displacement. It functions as a core component of the 3300 XL 8 mm Proximity Transducer System, which also includes an extension cable and a Proximitor Sensor. The probe operates by having the Proximitor Sensor generate a high-frequency radio frequency (RF) signal, which is transmitted through the extension cable and radiated from the probe's tip into a small electromagnetic field. When a conductive target, such as a machine shaft, enters this field, eddy currents are induced on its surface. These currents create a secondary magnetic field that opposes the primary field, causing a measurable change in the RF signal's amplitude. This change is directly proportional to the gap between the probe tip and the target surface. The Proximitor Sensor demodulates this signal, converting it into a DC voltage that accurately represents the physical distance. This conditioned voltage signal is then transmitted to a monitoring system, such as the Bently Nevada 3500, for real-time analysis of radial vibration, axial position, and shaft speed.
Detailed Specifications
Parameter Specification
Manufacturer Bently Nevada
Part Number 330102-00-60-10-01-05
Product Type 3300 XL 8 mm Reverse Mount Proximity Probe
Condition Brand New
Warranty 12 Months
Total Length 1.0 meter (3.3 feet)
Case Length 6.0 inches (152 mm)
Mounting Option Reverse Mount
Connector Type Miniature coaxial ClickLoc™ connector, gold-plated
Probe Tip Material Polyphenylene Sulfide (PPS)
Probe Case Material AISI 304 Stainless Steel
Agency Approvals Multiple Approvals: CSA (Class I, Div 1/2), ATEX/IECEx (Zone 0/1)
Operational Capabilities
In Oil & Gas and Power Generation applications, the 330102-00-60-10-01-05 probe demonstrates high reliability in demanding operational environments. Its construction with a PPS tip and stainless steel case allows for continuous operation in temperatures ranging from -34 °C to +177 °C (-29 °F to +350 °F). The gold-plated ClickLoc connector provides a secure, corrosion-resistant connection that prevents signal degradation from fluid ingress or vibration-induced intermittence. When paired with a 3300 XL Proximitor Sensor, the system provides a linear measurement range of 2.0 mm (80 mils) with a scale factor of 7.87 V/mm (200 mV/mil), ensuring precise data for machine diagnostics. The system is designed for high immunity to radio frequency interference (RFI), minimizing signal corruption in electrically noisy industrial environments. The probe's physical durability and signal integrity are critical for monitoring high-speed turbomachinery, where accurate measurement of shaft dynamics is essential for preventing catastrophic failure.
Applications
Power generation turbines and generators
Oil & gas compressors and pumps
Industrial rotating machinery monitoring
Predictive maintenance systems
Process automation
Technical FAQ
Q: What systems is the 330102-00-60-10-01-05 compatible with?
A: The 330102-00-60-10-01-05 probe is a component of the 3300 XL 8 mm Transducer System. For proper operation, it must be used with a 3300 XL extension cable and a 3300 XL Proximitor Sensor (e.g., part number 330180). This complete transducer system is fully compatible with Bently Nevada monitoring systems, including the 3500 Series Machinery Protection System and ADRE Sxp/408 DSPi data acquisition systems. It is not electrically or mechanically compatible with components from other transducer series, such as the 7200 or 3000 series.
Q: What are the installation requirements?
A: As a reverse-mount probe, the 330102-00-60-10-01-05 is installed from inside the machine housing, with the probe body extending outward. A clearance hole must be drilled through the machine case to accommodate the 8 mm probe tip. The target area on the observed shaft must be smooth, free of surface defects, and have a minimum diameter of 10.7 mm (0.42 in) to ensure measurement accuracy. The probe's gap should be set to the center of its linear range, typically corresponding to -10.0 Vdc. The ClickLoc connector must be tightened to the specified torque to ensure a secure, environmentally sealed connection. Cable routing must avoid areas of extreme heat, physical abrasion, and proximity to high-voltage power lines to maintain signal integrity.

200350-12-00-00 | Bently Nevada | Accelerometers — 200350-12-00-00 | Bently Nevada | Accelerometers
Technical Overview
The Bently Nevada 200350-12-00-00 is a general-purpose, case-mounted industrial accelerometer designed for measuring absolute bearing housing or machine casing vibration. It utilizes a piezoelectric sensing element that generates a low-impedance voltage signal directly proportional to the acceleration of the component to which it is mounted. This analog voltage signal is transmitted via a two-wire system, which also supplies constant current power to the sensor's internal electronics (IEPE standard). The 200350-12-00-00 is specifically engineered for integration with Bently Nevada machinery protection systems, such as the 3500 series. It directly interfaces with the 3500/42M Proximitor/Seismic Monitor, which processes the raw acceleration signal. The monitor can then provide real-time acceleration data or perform single integration to derive velocity, a common parameter for assessing rotating machinery health. Constructed from 316L stainless steel with a hermetic seal, the 200350-12-00-00 is built to withstand harsh industrial environments, ensuring reliable signal transmission and long operational life in critical machinery monitoring applications.
Detailed Specifications
Parameter Specification
Manufacturer Bently Nevada
Part Number 200350-12-00-00
Product Type Accelerometers
Condition Brand New
Warranty 12 Months
Sensitivity 10.2 mV/m·s⁻² (100 mV/g) ±5%
Frequency Response 0.5 Hz to 10 kHz (±3 dB)
Measurement Range ±490 m/s² (±50 g) peak
Power Requirement (IEPE) 18 to 30 VDC, 2 to 10 mA Constant Current
Connector 2-pin MIL-C-5015, Top Exit
Operating Temperature Range -55 °C to +121 °C (-67 °F to +250 °F)
Case Material 316L Stainless Steel, Hermetically Sealed
Operational Capabilities
In Oil & Gas and Power Generation applications, the 200350-12-00-00 provides essential data for condition monitoring of critical assets like gas and steam turbines, compressors, pumps, and generators. Its reliability is substantiated by its robust construction; the hermetically sealed 316L stainless steel housing (rated to IP68) prevents ingress of moisture, chemicals, and particulates common in these environments. The sensor is designed for high MTBF (Mean Time Between Failures) through the use of solid-state electronics and minimal moving parts. Environmentally, the 200350-12-00-00 is specified to operate reliably from -55 °C to +121 °C, accommodating a wide range of ambient and machine surface temperatures. It is also designed to survive high-g shock events (up to 5000 g peak), ensuring data integrity is maintained even during machinery startup, shutdown, or upset conditions.
Applications
Power generation turbines and generators
Oil & gas compressors and pumps
Industrial rotating machinery monitoring
Predictive maintenance systems
Process automation
Technical FAQ
Q: What systems is the 200350-12-00-00 compatible with?
A: The 200350-12-00-00 is designed for primary compatibility with Bently Nevada monitoring systems, including the 3500 Machinery Protection System (interfacing with the 3500/42M Proximitor/Seismic Monitor) and the 3300 Monitoring System. It is also compatible with any third-party data acquisition or monitoring system that can provide standard IEPE (Integrated Electronics Piezo-Electric) sensor power, specifically a constant current source of 2 to 10 mA at a voltage of 18 to 30 VDC.
Q: What are the installation requirements?
A: Proper installation is critical for accurate measurement. The mounting surface must be a flat, smooth (recommended finish of 0.8 μm / 32 μin Ra), and clean area on the machine case. A single mounting hole must be drilled and tapped for the sensor's 1/4-28 UNF mounting stud. Apply a thin, uniform layer of coupling fluid (silicone grease) to the mounting surface to eliminate air gaps and ensure optimal vibration transmission. The sensor must be tightened to the specified torque of 2.7 to 5.4 N·m (24 to 48 lbf·in) using a calibrated torque wrench. Ensure the interconnecting cable is routed to prevent strain on the connector and is shielded from high-voltage lines or other sources of electromagnetic interference. Use of conduit is recommended for physical protection.

200350-12-00-00 | Bently Nevada | Accelerometers
Technical Overview
The Bently Nevada 200350-12-00-00 is a general-purpose, case-mounted industrial accelerometer designed for measuring absolute bearing housing or machine casing vibration. It utilizes a piezoelectric sensing element that generates a low-impedance voltage signal directly proportional to the acceleration of the component to which it is mounted. This analog voltage signal is transmitted via a two-wire system, which also supplies constant current power to the sensor's internal electronics (IEPE standard). The 200350-12-00-00 is specifically engineered for integration with Bently Nevada machinery protection systems, such as the 3500 series. It directly interfaces with the 3500/42M Proximitor/Seismic Monitor, which processes the raw acceleration signal. The monitor can then provide real-time acceleration data or perform single integration to derive velocity, a common parameter for assessing rotating machinery health. Constructed from 316L stainless steel with a hermetic seal, the 200350-12-00-00 is built to withstand harsh industrial environments, ensuring reliable signal transmission and long operational life in critical machinery monitoring applications.
Detailed Specifications
Parameter Specification
Manufacturer Bently Nevada
Part Number 200350-12-00-00
Product Type Accelerometers
Condition Brand New
Warranty 12 Months
Sensitivity 10.2 mV/m·s⁻² (100 mV/g) ±5%
Frequency Response 0.5 Hz to 10 kHz (±3 dB)
Measurement Range ±490 m/s² (±50 g) peak
Power Requirement (IEPE) 18 to 30 VDC, 2 to 10 mA Constant Current
Connector 2-pin MIL-C-5015, Top Exit
Operating Temperature Range -55 °C to +121 °C (-67 °F to +250 °F)
Case Material 316L Stainless Steel, Hermetically Sealed
Operational Capabilities
In Oil & Gas and Power Generation applications, the 200350-12-00-00 provides essential data for condition monitoring of critical assets like gas and steam turbines, compressors, pumps, and generators. Its reliability is substantiated by its robust construction; the hermetically sealed 316L stainless steel housing (rated to IP68) prevents ingress of moisture, chemicals, and particulates common in these environments. The sensor is designed for high MTBF (Mean Time Between Failures) through the use of solid-state electronics and minimal moving parts. Environmentally, the 200350-12-00-00 is specified to operate reliably from -55 °C to +121 °C, accommodating a wide range of ambient and machine surface temperatures. It is also designed to survive high-g shock events (up to 5000 g peak), ensuring data integrity is maintained even during machinery startup, shutdown, or upset conditions.
Applications
Power generation turbines and generators
Oil & gas compressors and pumps
Industrial rotating machinery monitoring
Predictive maintenance systems
Process automation
Technical FAQ
Q: What systems is the 200350-12-00-00 compatible with?
A: The 200350-12-00-00 is designed for primary compatibility with Bently Nevada monitoring systems, including the 3500 Machinery Protection System (interfacing with the 3500/42M Proximitor/Seismic Monitor) and the 3300 Monitoring System. It is also compatible with any third-party data acquisition or monitoring system that can provide standard IEPE (Integrated Electronics Piezo-Electric) sensor power, specifically a constant current source of 2 to 10 mA at a voltage of 18 to 30 VDC.
Q: What are the installation requirements?
A: Proper installation is critical for accurate measurement. The mounting surface must be a flat, smooth (recommended finish of 0.8 μm / 32 μin Ra), and clean area on the machine case. A single mounting hole must be drilled and tapped for the sensor's 1/4-28 UNF mounting stud. Apply a thin, uniform layer of coupling fluid (silicone grease) to the mounting surface to eliminate air gaps and ensure optimal vibration transmission. The sensor must be tightened to the specified torque of 2.7 to 5.4 N·m (24 to 48 lbf·in) using a calibrated torque wrench. Ensure the interconnecting cable is routed to prevent strain on the connector and is shielded from high-voltage lines or other sources of electromagnetic interference. Use of conduit is recommended for physical protection.

16710-33 | Bently Nevada | Interconnect Cable — 16710-33 | Bently Nevada | Interconnect Cable
Technical Overview
The Bently Nevada 16710-33 is a multi-conductor, shielded interconnect cable designed for high-fidelity signal transmission within the 3500 Machinery Protection System. Its primary function is to provide a reliable electrical connection between a 3500 series I/O module and its associated external or internal termination blocks. This specific cable, with a length of 1.0 meter (3.3 feet), is critical for routing low-level analog signals from machinery sensors, such as proximity probes or accelerometers, to the monitoring modules for processing. The construction of the 16710-33 incorporates robust shielding to reject electromagnetic interference (EMI) and radio-frequency interference (RFI), ensuring high signal integrity, which is paramount for accurate vibration, position, and speed measurements. One end features a high-density D-subminiature connector for secure attachment to the I/O module, while the other end is configured for connection to the system's terminal strips. The precise engineering of the 16710-33 ensures that the signal characteristics are preserved throughout the measurement chain, enabling the 3500 system to perform its protective and diagnostic functions with maximum accuracy and reliability.
Detailed Specifications
Parameter Specification
Manufacturer Bently Nevada
Part Number 16710-33
Product Type Interconnect Cable
Condition Brand New
Warranty 12 Months
Cable Length 1.0 meter (3.3 feet)
Connector A Female D-subminiature (DB-type) for 3500 I/O Module
Connector B Pigtail with pre-stripped conductors for terminal block connection
Shielding Overall aluminum/Mylar foil shield with drain wire for EMI/RFI rejection
Conductor Gauge 22 AWG, stranded tinned copper
Operating Temperature -30°C to +100°C (-22°F to +212°F)
Jacket Material Industrial Grade PVC, Gray
Operational Capabilities
In Oil & Gas and Power Generation applications, the 16710-33 interconnect cable demonstrates high reliability in continuous-duty environments. Its robust construction is engineered to withstand the typical ambient conditions of a plant floor, including moderate vibration and wide temperature swings as specified by its -30°C to +100°C operating range. The cable's performance is defined by its ability to maintain signal integrity for critical measurements on assets like gas and steam turbines, centrifugal and reciprocating compressors, and large pump systems. The multi-layer shielding is effective in mitigating electrical noise from variable frequency drives (VFDs), motors, and high-voltage lines, preventing signal corruption that could lead to false alarms or missed protection events. The design focuses on long-term stability, with high-quality connectors and strain relief that prevent intermittent connections, a common failure point in industrial settings. The 16710-33 is an integral component in achieving the high Mean Time Between Failure (MTBF) rates expected from a SIL-rated machinery protection system.
Applications
Power generation turbines and generators
Oil & gas compressors and pumps
Industrial rotating machinery monitoring
Predictive maintenance systems
Process automation
Technical FAQ
Q: What systems is the 16710-33 compatible with?
A: The 16710-33 is specifically designed for use with the Bently Nevada 3500 Machinery Protection System. It is used to connect various 3500 I/O modules, such as the 3500/40M Proximitor Monitor, 3500/42M Proximitor/Seismic Monitor, and 3500/45 Position Monitor, to their corresponding external termination blocks (e.g., 3500/25 Keyphasor I/O, 3500/40 External Termination Block) or internal termination I/O modules. Compatibility is dependent on the specific I/O module and termination type being used in the 3500 rack configuration.
Q: What are the installation requirements?
A: Proper installation is critical for system performance. First, ensure all power to the 3500 rack is de-energized before installation. Securely fasten the D-sub connector of the 16710-33 to the rear of the designated I/O module using the integrated jackscrews. Route the cable through designated cable trays, avoiding sharp bends (maintain a minimum bend radius of 10x the cable diameter), pinch points, and proximity to high-voltage power cables to prevent physical damage and noise induction. Land the pre-stripped conductors of the pigtail end onto the correct terminals of the associated terminal block, following the wiring diagram specific to the monitor and transducer type. Ensure proper strain relief is applied to the cable at both ends. The cable's shield drain wire must be terminated correctly, typically at the rack chassis ground terminal only, to prevent ground loops per Bently Nevada system grounding guidelines.

16710-33 | Bently Nevada | Interconnect Cable
Technical Overview
The Bently Nevada 16710-33 is a multi-conductor, shielded interconnect cable designed for high-fidelity signal transmission within the 3500 Machinery Protection System. Its primary function is to provide a reliable electrical connection between a 3500 series I/O module and its associated external or internal termination blocks. This specific cable, with a length of 1.0 meter (3.3 feet), is critical for routing low-level analog signals from machinery sensors, such as proximity probes or accelerometers, to the monitoring modules for processing. The construction of the 16710-33 incorporates robust shielding to reject electromagnetic interference (EMI) and radio-frequency interference (RFI), ensuring high signal integrity, which is paramount for accurate vibration, position, and speed measurements. One end features a high-density D-subminiature connector for secure attachment to the I/O module, while the other end is configured for connection to the system's terminal strips. The precise engineering of the 16710-33 ensures that the signal characteristics are preserved throughout the measurement chain, enabling the 3500 system to perform its protective and diagnostic functions with maximum accuracy and reliability.
Detailed Specifications
Parameter Specification
Manufacturer Bently Nevada
Part Number 16710-33
Product Type Interconnect Cable
Condition Brand New
Warranty 12 Months
Cable Length 1.0 meter (3.3 feet)
Connector A Female D-subminiature (DB-type) for 3500 I/O Module
Connector B Pigtail with pre-stripped conductors for terminal block connection
Shielding Overall aluminum/Mylar foil shield with drain wire for EMI/RFI rejection
Conductor Gauge 22 AWG, stranded tinned copper
Operating Temperature -30°C to +100°C (-22°F to +212°F)
Jacket Material Industrial Grade PVC, Gray
Operational Capabilities
In Oil & Gas and Power Generation applications, the 16710-33 interconnect cable demonstrates high reliability in continuous-duty environments. Its robust construction is engineered to withstand the typical ambient conditions of a plant floor, including moderate vibration and wide temperature swings as specified by its -30°C to +100°C operating range. The cable's performance is defined by its ability to maintain signal integrity for critical measurements on assets like gas and steam turbines, centrifugal and reciprocating compressors, and large pump systems. The multi-layer shielding is effective in mitigating electrical noise from variable frequency drives (VFDs), motors, and high-voltage lines, preventing signal corruption that could lead to false alarms or missed protection events. The design focuses on long-term stability, with high-quality connectors and strain relief that prevent intermittent connections, a common failure point in industrial settings. The 16710-33 is an integral component in achieving the high Mean Time Between Failure (MTBF) rates expected from a SIL-rated machinery protection system.
Applications
Power generation turbines and generators
Oil & gas compressors and pumps
Industrial rotating machinery monitoring
Predictive maintenance systems
Process automation
Technical FAQ
Q: What systems is the 16710-33 compatible with?
A: The 16710-33 is specifically designed for use with the Bently Nevada 3500 Machinery Protection System. It is used to connect various 3500 I/O modules, such as the 3500/40M Proximitor Monitor, 3500/42M Proximitor/Seismic Monitor, and 3500/45 Position Monitor, to their corresponding external termination blocks (e.g., 3500/25 Keyphasor I/O, 3500/40 External Termination Block) or internal termination I/O modules. Compatibility is dependent on the specific I/O module and termination type being used in the 3500 rack configuration.
Q: What are the installation requirements?
A: Proper installation is critical for system performance. First, ensure all power to the 3500 rack is de-energized before installation. Securely fasten the D-sub connector of the 16710-33 to the rear of the designated I/O module using the integrated jackscrews. Route the cable through designated cable trays, avoiding sharp bends (maintain a minimum bend radius of 10x the cable diameter), pinch points, and proximity to high-voltage power cables to prevent physical damage and noise induction. Land the pre-stripped conductors of the pigtail end onto the correct terminals of the associated terminal block, following the wiring diagram specific to the monitor and transducer type. Ensure proper strain relief is applied to the cable at both ends. The cable's shield drain wire must be terminated correctly, typically at the rack chassis ground terminal only, to prevent ground loops per Bently Nevada system grounding guidelines.

330102-00-12-05-02-05 | Bently Nevada | 3300 XL 8 mm Proximity Probes — 330102-00-12-05-02-05 | Bently Nevada | 3300 XL 8 mm Proximity Probes
Technical Overview
The Bently Nevada 330102-00-12-05-02-05 is a 3300 XL 8 mm reverse mount proximity probe, a component of an eddy current transducer system designed for non-contact displacement and vibration measurement on rotating machinery. The probe functions by emitting a high-frequency radio frequency (RF) signal from its encapsulated tip. When positioned near a conductive target material, such as a machine shaft, this RF field induces eddy currents on the surface of the target. The interaction between the probe's field and the eddy currents creates an impedance change in the probe's coil, which is directly proportional to the gap between the probe tip and the target surface. This raw signal is transmitted through its integral 0.5-meter cable to a 3300 XL extension cable and subsequently to a 3300 XL Proximitor Sensor. The Proximitor Sensor demodulates and linearizes the signal, producing a precise DC voltage output that corresponds to the physical gap. This conditioned signal is then supplied to a Bently Nevada 3500 Series monitoring system for continuous machine protection, diagnostics, and data logging.
Detailed Specifications
Parameter Specification
Manufacturer Bently Nevada
Part Number 330102-00-12-05-02-05
Product Type 3300 XL 8 mm Reverse Mount Proximity Probe
Condition Brand New
Warranty 12 Months
Total Length 0.5 meter (1.6 feet)
Mounting Option 3/8-24 UNF threads, Reverse Mount
Case Length 1.2 inches (30.5 mm)
Connector Type Miniature coaxial ClickLoc connector, gold-plated
Linear Range 2.0 mm (80 mils)
Scale Factor 7.87 V/mm (200 mV/mil) &pm;5%, when used with 3300 XL Proximitor and AISI 4140 steel target
Frequency Response 0 Hz (DC) to 10 kHz (-3 dB)
Agency Approvals CSA/NRTL/C, ATEX/IECEx (Ex ia IIC T4 Ga, Ex ia IIIC T135°C Da)
Operational Capabilities
In Oil & Gas and Power Generation applications, the 330102-00-12-05-02-05 probe is integral to Machinery Protection Systems (MPS) on critical assets like gas and steam turbines, compressors, and large motor-pump sets. It provides the primary measurement for radial vibration, axial thrust position, and shaft eccentricity. The probe's construction from AISI 304 stainless steel ensures high reliability in corrosive and high-temperature environments. Its tip is hermetically sealed with a high-pressure, injection-molded Ryton® PPS material, preventing ingress of oil and process fluids. The specified operating temperature range for the probe tip is -34 °C to +177 °C (-29 °F to +350 °F). The included agency approvals (CSA, ATEX, IECEx) certify the 330102-00-12-05-02-05 for safe operation as an intrinsically safe apparatus in specified hazardous areas, a mandatory requirement for many hydrocarbon processing and power plant environments. The system demonstrates high long-term stability, minimizing calibration drift and ensuring consistent machine protection over extended operational periods.
Applications
Power generation turbines and generators
Oil & gas compressors and pumps
Industrial rotating machinery monitoring
Predictive maintenance systems
Process automation
Technical FAQ
Q: What systems is the 330102-00-12-05-02-05 compatible with?
A: The 330102-00

330102-00-12-05-02-05 | Bently Nevada | 3300 XL 8 mm Proximity Probes
Technical Overview
The Bently Nevada 330102-00-12-05-02-05 is a 3300 XL 8 mm reverse mount proximity probe, a component of an eddy current transducer system designed for non-contact displacement and vibration measurement on rotating machinery. The probe functions by emitting a high-frequency radio frequency (RF) signal from its encapsulated tip. When positioned near a conductive target material, such as a machine shaft, this RF field induces eddy currents on the surface of the target. The interaction between the probe's field and the eddy currents creates an impedance change in the probe's coil, which is directly proportional to the gap between the probe tip and the target surface. This raw signal is transmitted through its integral 0.5-meter cable to a 3300 XL extension cable and subsequently to a 3300 XL Proximitor Sensor. The Proximitor Sensor demodulates and linearizes the signal, producing a precise DC voltage output that corresponds to the physical gap. This conditioned signal is then supplied to a Bently Nevada 3500 Series monitoring system for continuous machine protection, diagnostics, and data logging.
Detailed Specifications
Parameter Specification
Manufacturer Bently Nevada
Part Number 330102-00-12-05-02-05
Product Type 3300 XL 8 mm Reverse Mount Proximity Probe
Condition Brand New
Warranty 12 Months
Total Length 0.5 meter (1.6 feet)
Mounting Option 3/8-24 UNF threads, Reverse Mount
Case Length 1.2 inches (30.5 mm)
Connector Type Miniature coaxial ClickLoc connector, gold-plated
Linear Range 2.0 mm (80 mils)
Scale Factor 7.87 V/mm (200 mV/mil) &pm;5%, when used with 3300 XL Proximitor and AISI 4140 steel target
Frequency Response 0 Hz (DC) to 10 kHz (-3 dB)
Agency Approvals CSA/NRTL/C, ATEX/IECEx (Ex ia IIC T4 Ga, Ex ia IIIC T135°C Da)
Operational Capabilities
In Oil & Gas and Power Generation applications, the 330102-00-12-05-02-05 probe is integral to Machinery Protection Systems (MPS) on critical assets like gas and steam turbines, compressors, and large motor-pump sets. It provides the primary measurement for radial vibration, axial thrust position, and shaft eccentricity. The probe's construction from AISI 304 stainless steel ensures high reliability in corrosive and high-temperature environments. Its tip is hermetically sealed with a high-pressure, injection-molded Ryton® PPS material, preventing ingress of oil and process fluids. The specified operating temperature range for the probe tip is -34 °C to +177 °C (-29 °F to +350 °F). The included agency approvals (CSA, ATEX, IECEx) certify the 330102-00-12-05-02-05 for safe operation as an intrinsically safe apparatus in specified hazardous areas, a mandatory requirement for many hydrocarbon processing and power plant environments. The system demonstrates high long-term stability, minimizing calibration drift and ensuring consistent machine protection over extended operational periods.
Applications
Power generation turbines and generators
Oil & gas compressors and pumps
Industrial rotating machinery monitoring
Predictive maintenance systems
Process automation
Technical FAQ
Q: What systems is the 330102-00-12-05-02-05 compatible with?
A: The 330102-00

21000-16-05-00-115-03-02 | Bently Nevada | Proximity ProbeHousing Assemblies — 21000-16-05-00-115-03-02 | Bently Nevada | Proximity ProbeHousing Assemblies
Technical Overview
The Bently Nevada 21000-16-05-00-115-03-02 is a rigid proximity probe housing assembly engineered to provide a secure and stable mounting for eddy current proximity probes used in machinery protection systems. Its primary function is to physically protect the probe while positioning it at a precise, fixed distance from the observed machine shaft or target surface. This specific assembly, constructed from 303 stainless steel, ensures mechanical integrity and corrosion resistance in harsh industrial environments. It integrates as a critical front-end mechanical component for systems like the Bently Nevada 3500. While the housing itself is a passive component and does not transmit an electrical signal, its dimensional accuracy is fundamental for the integrity of the measurement chain. By holding the probe stationary relative to the machine casing, it enables the connected Proximitor Sensor and monitor to accurately measure radial vibration, axial thrust position, and phase reference (Keyphasor) data. The 1.6-inch penetration length and 1-1/4 - 12 UNF mounting thread are specified for direct installation into pre-drilled and tapped holes on machine casings.
Detailed Specifications
Parameter Specification
Manufacturer Bently Nevada
Part Number 21000-16-05-00-115-03-02
Product Type Proximity Probe Housing Assembly
Condition Brand New
Warranty 12 Months
Housing Material 303 Stainless Steel
Mounting Thread 1-1/4 - 12 UNF
Penetration Length (A) 1.6 in (40.6 mm)
Standoff Length (B) 0.5 in (12.7 mm)
Compatible Probe Series Bently Nevada 3300 XL 8mm, 3300 8mm, 7200 5mm & 8mm
Mounting Option Supplied with two 1-1/4 - 12 UNF mounting nuts
Operating Temperature Range -51°C to +177°C (-60°F to +350°F)
Operational Capabilities
In Oil & Gas and Power Generation applications, the 21000-16-05-00-115-03-02 housing assembly demonstrates high reliability on critical rotating machinery such as gas and steam turbines, centrifugal compressors, and boiler feed pumps. Its rigid, single-piece 303 stainless steel construction provides excellent resistance to mechanical vibration and thermal expansion, ensuring measurement stability and data integrity for the connected condition monitoring system. The material specification offers robust protection against corrosion from hydrocarbons, process chemicals, and atmospheric moisture. As a passive mechanical component, its Mean Time Between Failures (MTBF) is exceptionally high, with reliability being primarily dependent on correct installation and torque procedures. The specified operating temperature range of -51°C to +177°C allows for direct mounting on hot machine casings without degradation of its mechanical properties, making it suitable for a wide spectrum of industrial operating conditions.
Applications
Power generation turbines and generators
Oil & gas compressors and pumps
Industrial rotating machinery monitoring
Predictive maintenance systems
Process automation
Technical FAQ
Q: What systems is the 21000-16-05-00-115-03-02 compatible with?
A: The 21000-16-05-00-115-03-02 is designed as a front-end component for Bently Nevada's 3500 and 3300 Machinery Protection and Condition Monitoring Systems. It is mechanically compatible with any system utilizing Bently Nevada 3300 XL 8mm, 3300 8mm, or 7200 series (5mm and 8mm) proximity probes. Its function is purely mechanical, so electrical compatibility is determined by the probe, extension cable, and Proximitor sensor it is used with.
Q: What are the installation requirements?
A: Installation requires a pre-drilled and tapped hole in the machine casing with a 1-1/4 - 12 UNF thread. The housing is threaded into this mount point. The proximity probe is then inserted into the housing and its axial position is adjusted to set the correct DC gap voltage relative to the shaft

21000-16-05-00-115-03-02 | Bently Nevada | Proximity ProbeHousing Assemblies
Technical Overview
The Bently Nevada 21000-16-05-00-115-03-02 is a rigid proximity probe housing assembly engineered to provide a secure and stable mounting for eddy current proximity probes used in machinery protection systems. Its primary function is to physically protect the probe while positioning it at a precise, fixed distance from the observed machine shaft or target surface. This specific assembly, constructed from 303 stainless steel, ensures mechanical integrity and corrosion resistance in harsh industrial environments. It integrates as a critical front-end mechanical component for systems like the Bently Nevada 3500. While the housing itself is a passive component and does not transmit an electrical signal, its dimensional accuracy is fundamental for the integrity of the measurement chain. By holding the probe stationary relative to the machine casing, it enables the connected Proximitor Sensor and monitor to accurately measure radial vibration, axial thrust position, and phase reference (Keyphasor) data. The 1.6-inch penetration length and 1-1/4 - 12 UNF mounting thread are specified for direct installation into pre-drilled and tapped holes on machine casings.
Detailed Specifications
Parameter Specification
Manufacturer Bently Nevada
Part Number 21000-16-05-00-115-03-02
Product Type Proximity Probe Housing Assembly
Condition Brand New
Warranty 12 Months
Housing Material 303 Stainless Steel
Mounting Thread 1-1/4 - 12 UNF
Penetration Length (A) 1.6 in (40.6 mm)
Standoff Length (B) 0.5 in (12.7 mm)
Compatible Probe Series Bently Nevada 3300 XL 8mm, 3300 8mm, 7200 5mm & 8mm
Mounting Option Supplied with two 1-1/4 - 12 UNF mounting nuts
Operating Temperature Range -51°C to +177°C (-60°F to +350°F)
Operational Capabilities
In Oil & Gas and Power Generation applications, the 21000-16-05-00-115-03-02 housing assembly demonstrates high reliability on critical rotating machinery such as gas and steam turbines, centrifugal compressors, and boiler feed pumps. Its rigid, single-piece 303 stainless steel construction provides excellent resistance to mechanical vibration and thermal expansion, ensuring measurement stability and data integrity for the connected condition monitoring system. The material specification offers robust protection against corrosion from hydrocarbons, process chemicals, and atmospheric moisture. As a passive mechanical component, its Mean Time Between Failures (MTBF) is exceptionally high, with reliability being primarily dependent on correct installation and torque procedures. The specified operating temperature range of -51°C to +177°C allows for direct mounting on hot machine casings without degradation of its mechanical properties, making it suitable for a wide spectrum of industrial operating conditions.
Applications
Power generation turbines and generators
Oil & gas compressors and pumps
Industrial rotating machinery monitoring
Predictive maintenance systems
Process automation
Technical FAQ
Q: What systems is the 21000-16-05-00-115-03-02 compatible with?
A: The 21000-16-05-00-115-03-02 is designed as a front-end component for Bently Nevada's 3500 and 3300 Machinery Protection and Condition Monitoring Systems. It is mechanically compatible with any system utilizing Bently Nevada 3300 XL 8mm, 3300 8mm, or 7200 series (5mm and 8mm) proximity probes. Its function is purely mechanical, so electrical compatibility is determined by the probe, extension cable, and Proximitor sensor it is used with.
Q: What are the installation requirements?
A: Installation requires a pre-drilled and tapped hole in the machine casing with a 1-1/4 - 12 UNF thread. The housing is threaded into this mount point. The proximity probe is then inserted into the housing and its axial position is adjusted to set the correct DC gap voltage relative to the shaft

Triconex 9674-810 Terminal Board — Triconex 9674-810 Terminal Board
The Triconex 9674-810 is a high-reliability External Termination Panel for Tricon v9 and v10 safety systems. Designed for rugged industrial environments, this terminal board facilitates secure field-to-control connectivity for digital output signals in SIL3-rated safety applications.

Triconex 9674-810 Terminal Board
The Triconex 9674-810 is a high-reliability External Termination Panel for Tricon v9 and v10 safety systems. Designed for rugged industrial environments, this terminal board facilitates secure field-to-control connectivity for digital output signals in SIL3-rated safety applications.

Honeywell Experion PKS 51307038-100 Power Control Module — Honeywell Experion PKS 51307038-100 Power Control Module
The Honeywell 51307038-100 is a dedicated Power Control Module for the Experion PKS series. It provides stable voltage regulation and integrated diagnostic reporting to ensure the reliability of industrial DCS hardware.

Honeywell Experion PKS 51307038-100 Power Control Module
The Honeywell 51307038-100 is a dedicated Power Control Module for the Experion PKS series. It provides stable voltage regulation and integrated diagnostic reporting to ensure the reliability of industrial DCS hardware.

Siemens 6DR4004-8D SIPART PS2 Positioner Mounting Kit — Siemens 6DR4004-8D SIPART PS2 Positioner Mounting Kit
The Siemens 6DR4004-8D is a universal stainless steel mounting kit designed for SIPART PS2 positioners. It complies with NAMUR IEC 60534-6-1 standards for linear actuators, providing a precise and vibration-resistant mechanical link for valve strokes ranging from 3 mm to 35 mm.

Siemens 6DR4004-8D SIPART PS2 Positioner Mounting Kit
The Siemens 6DR4004-8D is a universal stainless steel mounting kit designed for SIPART PS2 positioners. It complies with NAMUR IEC 60534-6-1 standards for linear actuators, providing a precise and vibration-resistant mechanical link for valve strokes ranging from 3 mm to 35 mm.

Foxboro RH924YF I/A Series FCP280 DIN-Rail Mounted Modular Baseplate — Foxboro RH924YF I/A Series FCP280 DIN-Rail Mounted Modular Baseplate
The Foxboro RH924YF is a high-performance DIN-rail mounted baseplate designed for FCP280 processors. This modular unit supports redundant power and high-speed communication, providing a stable and scalable infrastructure for the I/A Series and EcoStruxure DCS.

Foxboro RH924YF I/A Series FCP280 DIN-Rail Mounted Modular Baseplate
The Foxboro RH924YF is a high-performance DIN-rail mounted baseplate designed for FCP280 processors. This modular unit supports redundant power and high-speed communication, providing a stable and scalable infrastructure for the I/A Series and EcoStruxure DCS.

Bently Nevada 990-05-50-02-01 Vibration Transmitter — Bently Nevada 990-05-50-02-01 Vibration Transmitter
Technical Overview
The Bently Nevada 990-05-50-02-01 is a genuine industrial automation component designed for reliable operation in demanding environments. This high-quality product ensures optimal performance and long-term durability for critical machinery protection systems.
Detailed Specifications
Parameter Specification
Manufacturer Bently Nevada
Part Number 990-05-50-02-01
Condition Brand New
Warranty 12 Months
Applications
Power generation turbines and generators
Oil & gas compressors and pumps
Industrial rotating machinery monitoring
Predictive maintenance systems
Process automation in manufacturing plants
Operational Capabilities
This Bently Nevada 990-05-50-02-01 component delivers consistent performance in harsh industrial environments. It is engineered for seamless integration with Bently Nevada monitoring systems, ensuring accurate data collection for predictive maintenance and operational efficiency.
Technical FAQ
Q: Is this an authentic Bently Nevada product?
A: Yes, this is a 100% genuine Bently Nevada product with full manufacturer warranty.
Q: What warranty is included?
A: All products include a standard 12-month warranty with comprehensive technical support.

Bently Nevada 990-05-50-02-01 Vibration Transmitter
Technical Overview
The Bently Nevada 990-05-50-02-01 is a genuine industrial automation component designed for reliable operation in demanding environments. This high-quality product ensures optimal performance and long-term durability for critical machinery protection systems.
Detailed Specifications
Parameter Specification
Manufacturer Bently Nevada
Part Number 990-05-50-02-01
Condition Brand New
Warranty 12 Months
Applications
Power generation turbines and generators
Oil & gas compressors and pumps
Industrial rotating machinery monitoring
Predictive maintenance systems
Process automation in manufacturing plants
Operational Capabilities
This Bently Nevada 990-05-50-02-01 component delivers consistent performance in harsh industrial environments. It is engineered for seamless integration with Bently Nevada monitoring systems, ensuring accurate data collection for predictive maintenance and operational efficiency.
Technical FAQ
Q: Is this an authentic Bently Nevada product?
A: Yes, this is a 100% genuine Bently Nevada product with full manufacturer warranty.
Q: What warranty is included?
A: All products include a standard 12-month warranty with comprehensive technical support.

Bently Nevada 330103-00-11-50-02-05 3300 XL 8 mm Probe — Bently Nevada 330103-00-11-50-02-05 3300 XL 8 mm Probe
Technical Overview
The Bently Nevada 330103-00-11-50-02-05 is a genuine industrial automation component designed for reliable operation in demanding environments. This high-quality product ensures optimal performance and long-term durability for critical machinery protection systems.
Detailed Specifications
Parameter Specification
Manufacturer Bently Nevada
Part Number 330103-00-11-50-02-05
Condition Brand New
Warranty 12 Months
Applications
Power generation turbines and generators
Oil & gas compressors and pumps
Industrial rotating machinery monitoring
Predictive maintenance systems
Process automation in manufacturing plants
Operational Capabilities
This Bently Nevada 330103-00-11-50-02-05 component delivers consistent performance in harsh industrial environments. It is engineered for seamless integration with Bently Nevada monitoring systems, ensuring accurate data collection for predictive maintenance and operational efficiency.
Technical FAQ
Q: Is this an authentic Bently Nevada product?
A: Yes, this is a 100% genuine Bently Nevada product with full manufacturer warranty.
Q: What warranty is included?
A: All products include a standard 12-month warranty with comprehensive technical support.

Bently Nevada 330103-00-11-50-02-05 3300 XL 8 mm Probe
Technical Overview
The Bently Nevada 330103-00-11-50-02-05 is a genuine industrial automation component designed for reliable operation in demanding environments. This high-quality product ensures optimal performance and long-term durability for critical machinery protection systems.
Detailed Specifications
Parameter Specification
Manufacturer Bently Nevada
Part Number 330103-00-11-50-02-05
Condition Brand New
Warranty 12 Months
Applications
Power generation turbines and generators
Oil & gas compressors and pumps
Industrial rotating machinery monitoring
Predictive maintenance systems
Process automation in manufacturing plants
Operational Capabilities
This Bently Nevada 330103-00-11-50-02-05 component delivers consistent performance in harsh industrial environments. It is engineered for seamless integration with Bently Nevada monitoring systems, ensuring accurate data collection for predictive maintenance and operational efficiency.
Technical FAQ
Q: Is this an authentic Bently Nevada product?
A: Yes, this is a 100% genuine Bently Nevada product with full manufacturer warranty.
Q: What warranty is included?
A: All products include a standard 12-month warranty with comprehensive technical support.

Bently Nevada 330101-00-20-90-02-00 3300 XL 8 mm Probe — Bently Nevada 330101-00-20-90-02-00 3300 XL 8 mm Probe
Technical Overview
The Bently Nevada 330101-00-20-90-02-00 is a genuine industrial automation component designed for reliable operation in demanding environments. This high-quality product ensures optimal performance and long-term durability for critical machinery protection systems.
Detailed Specifications
Parameter Specification
Manufacturer Bently Nevada
Part Number 330101-00-20-90-02-00
Condition Brand New
Warranty 12 Months
Applications
Power generation turbines and generators
Oil & gas compressors and pumps
Industrial rotating machinery monitoring
Predictive maintenance systems
Process automation in manufacturing plants
Operational Capabilities
This Bently Nevada 330101-00-20-90-02-00 component delivers consistent performance in harsh industrial environments. It is engineered for seamless integration with Bently Nevada monitoring systems, ensuring accurate data collection for predictive maintenance and operational efficiency.
Technical FAQ
Q: Is this an authentic Bently Nevada product?
A: Yes, this is a 100% genuine Bently Nevada product with full manufacturer warranty.
Q: What warranty is included?
A: All products include a standard 12-month warranty with comprehensive technical support.

Bently Nevada 330101-00-20-90-02-00 3300 XL 8 mm Probe
Technical Overview
The Bently Nevada 330101-00-20-90-02-00 is a genuine industrial automation component designed for reliable operation in demanding environments. This high-quality product ensures optimal performance and long-term durability for critical machinery protection systems.
Detailed Specifications
Parameter Specification
Manufacturer Bently Nevada
Part Number 330101-00-20-90-02-00
Condition Brand New
Warranty 12 Months
Applications
Power generation turbines and generators
Oil & gas compressors and pumps
Industrial rotating machinery monitoring
Predictive maintenance systems
Process automation in manufacturing plants
Operational Capabilities
This Bently Nevada 330101-00-20-90-02-00 component delivers consistent performance in harsh industrial environments. It is engineered for seamless integration with Bently Nevada monitoring systems, ensuring accurate data collection for predictive maintenance and operational efficiency.
Technical FAQ
Q: Is this an authentic Bently Nevada product?
A: Yes, this is a 100% genuine Bently Nevada product with full manufacturer warranty.
Q: What warranty is included?
A: All products include a standard 12-month warranty with comprehensive technical support.