Hotline:

+8618059251527

About brand

FAQ

Contact

SKU: 330106-05-30-10-02-00

330106-05-30-10-02-00 | Bently Nevada | Proximity Probe

Overview

The 330106-05-30-10-02-00 is a high-quality Proximity Probe from Bently Nevada, designed for professional industrial automation and control systems.

Key Features

Industrial-grade reliability and performance
Designed for demanding environments
Compatible with Bently Nevada control systems
Brand new condition with full warranty

Technical Specifications

Parameter	Specification
Model Number	330106-05-30-10-02-00
Manufacturer	Bently Nevada
Product Type	Proximity Probe
Condition	Brand New

Applications

Industrial automation
Process control
Manufacturing systems

You may also like

Emerson DeltaV KJ4010X1-BG1 Localbus Right Extender — Emerson DeltaV KJ4010X1-BG1 Localbus Right Extender
Emerson DeltaV M-series Localbus Right Extender card (KJ4010X1-BG1 / 12P0830X072) for distributed control systems. Brand new original stock, fully verified with priority shipping options.

Emerson DeltaV KJ4010X1-BG1 Localbus Right Extender
Emerson DeltaV M-series Localbus Right Extender card (KJ4010X1-BG1 / 12P0830X072) for distributed control systems. Brand new original stock, fully verified with priority shipping options.

Emerson Ovation 1P00028G01 Remote Node Transition Panel — Emerson Ovation 1P00028G01 Remote Node Transition Panel
The Emerson Ovation 1P00028G01 Remote Node Transition Panel provides robust signal routing and high-integrity electrical isolation for legacy Ovation Distributed Control Systems (DCS). Operating at 220V AC across an ultra-wide temperature range of -40°C to +85°C, this compact transition panel eliminates field line noise and ensures reliable, deterministic peer-to-peer communication between remote I/O nodes and central controllers in demanding industrial environments.

Emerson Ovation 1P00028G01 Remote Node Transition Panel
The Emerson Ovation 1P00028G01 Remote Node Transition Panel provides robust signal routing and high-integrity electrical isolation for legacy Ovation Distributed Control Systems (DCS). Operating at 220V AC across an ultra-wide temperature range of -40°C to +85°C, this compact transition panel eliminates field line noise and ensures reliable, deterministic peer-to-peer communication between remote I/O nodes and central controllers in demanding industrial environments.

Honeywell 10001/R/I Fail Safe Control Vertical Bus Driver Module — Honeywell 10001/R/I Fail Safe Control Vertical Bus Driver Module
The Honeywell 10001/R/I is a Vertical Bus Driver for the Fail Safe Control (FSC) system. This compact 0.14kg module ensures high-speed data integrity across safety-critical backplanes. Designed for reliability in ESD and SIS applications, it features advanced diagnostics and a rugged USA-manufactured build for demanding industrial environments.

Honeywell 10001/R/I Fail Safe Control Vertical Bus Driver Module
The Honeywell 10001/R/I is a Vertical Bus Driver for the Fail Safe Control (FSC) system. This compact 0.14kg module ensures high-speed data integrity across safety-critical backplanes. Designed for reliability in ESD and SIS applications, it features advanced diagnostics and a rugged USA-manufactured build for demanding industrial environments.

CI-10 ABB 3BHT300055R0001 RS-485 PLC Interface Module — CI-10 ABB 3BHT300055R0001 RS-485 PLC Interface Module
The ABB 3BHT300055R0001 CI-10 is a specialized communication interface board for UNITROL Excitation Systems. It provides robust RS-485 serial connectivity and high-speed data processing to ensure reliable generator control and seamless DCS integration.

CI-10 ABB 3BHT300055R0001 RS-485 PLC Interface Module
The ABB 3BHT300055R0001 CI-10 is a specialized communication interface board for UNITROL Excitation Systems. It provides robust RS-485 serial connectivity and high-speed data processing to ensure reliable generator control and seamless DCS integration.

Allen-Bradley 1756-L60M03SE GuardLogix Safety CPU Controller Module — Allen-Bradley 1756-L60M03SE GuardLogix Safety CPU Controller Module
The Allen-Bradley 1756-L60M03SE is a GuardLogix Safety CPU module featuring 750 KB memory and 3-axis SERCOS motion control. This ControlLogix processor supports extensive networking via EtherNet/IP and ControlNet, making it ideal for integrated safety and high-precision motion applications.

Allen-Bradley 1756-L60M03SE GuardLogix Safety CPU Controller Module
The Allen-Bradley 1756-L60M03SE is a GuardLogix Safety CPU module featuring 750 KB memory and 3-axis SERCOS motion control. This ControlLogix processor supports extensive networking via EtherNet/IP and ControlNet, making it ideal for integrated safety and high-precision motion applications.

ABB PCD235 A101 3BHE032025R0101 Exciter Control Module — ABB PCD235 A101 3BHE032025R0101 Exciter Control Module
The ABB PCD235 A101 3BHE032025R0101 is a high-precision Exciter Control Module for UNITROL systems. It features advanced PID algorithms and Modbus RTU support to ensure stable generator performance and seamless DCS integration in demanding power environments.

ABB PCD235 A101 3BHE032025R0101 Exciter Control Module
The ABB PCD235 A101 3BHE032025R0101 is a high-precision Exciter Control Module for UNITROL systems. It features advanced PID algorithms and Modbus RTU support to ensure stable generator performance and seamless DCS integration in demanding power environments.

21504-00-32-10-02 | Bently Nevada | Vibration Probe — 21504-00-32-10-02 | Bently Nevada | Vibration Probe
Technical Overview
The Bently Nevada 21504-00-32-10-02 is a 3300 NSv series proximity vibration probe, a fundamental component of an eddy current transducer system designed for non-contact displacement and vibration measurement on rotating machinery. Its primary function is to measure the distance (gap) between the probe tip and a conductive target material, typically a machine shaft. The probe operates by generating a high-frequency radio frequency (RF) field from its tip coil. When brought near the conductive target, this field induces eddy currents on the target's surface. These eddy currents alter the impedance of the probe's coil system. This change in impedance is detected by an associated Proximitor Sensor, which demodulates the signal into a voltage directly proportional to the probe-to-target gap. This analog voltage signal is then transmitted to a monitoring system, such as the Bently Nevada 3500 Machinery Protection System, for real-time analysis, trending, and alarming. The 21504-00-32-10-02 is constructed with a stainless steel case for durability in industrial environments and is specifically configured with a 320 mm case length and a 1.0-meter integral cable.
Detailed Specifications
Parameter Specification
Manufacturer Bently Nevada
Part Number 21504-00-32-10-02
Product Type 3300 NSv Proximity Vibration Probe
Condition Brand New
Warranty 12 Months
Unthreaded Length 0 mm
Case Length 320 mm (12.6 in)
Total Length 1.0 metre (3.3 feet)
Connector Type Miniature coaxial ClickLoc connector, standard cable
Probe Tip Material Polyphenylene Sulfide (PPS)
Case Material AISI 304 Stainless Steel
System Linear Range 2 mm (80 mils)
System Scale Factor 7.87 V/mm (200 mV/mil) with 3300 NSv Proximitor
Operational Capabilities
In Oil & Gas and Power Generation applications, the 21504-00-32-10-02 probe demonstrates high reliability for continuous monitoring of critical assets such as gas and steam turbines, compressors, and large pump motors. Its non-contacting measurement principle eliminates mechanical wear, contributing to a high Mean Time Between Failures (MTBF) for the overall protection system. The probe is engineered to operate reliably in harsh industrial conditions. The probe tip is rated for continuous operation from -34 °C to +177 °C (-29 °F to +351 °F). The robust stainless steel case provides protection against physical impact and contaminants common in plant environments. When installed as part of a complete 3300 NSv transducer system, it provides a stable and repeatable measurement essential for machine protection and condition monitoring programs, enabling early detection of developing faults like imbalance, misalignment, and fluid-induced instabilities.
Applications
Power generation turbines and generators
Oil & gas compressors and pumps
Industrial rotating machinery monitoring
Predictive maintenance systems
Process automation
Technical FAQ
Q: What systems is the 21504-00-32-10-02 compatible with?
A: The 21504-00-32-10-02 probe is a component of the Bently Nevada 3300 NSv Proximity Transducer System. For correct operation, it must be used in conjunction with a 3300 NSv extension cable and a 3300 NSv Proximitor Sensor. The output from the Proximitor Sensor is compatible with Bently Nevada monitoring systems, including the 3500 and 3300 series, as well as any data acquisition system, PLC, or DCS capable of accepting a -24 Vdc powered, 7.87 V/mm (200 mV/mil) analog signal.
Q: What are the installation requirements?
A: Proper installation is critical for measurement accuracy. The probe must be mounted perpendicular to the target surface using a rigid bracket. The physical gap should be set to place the DC output voltage in the middle of the system's linear range, typically -10 Vdc. The target area on the shaft must be at least 10.7 mm (0.42 in) in diameter, smooth (0.4 to 0.8 µm / 16 to 32 µin rms), and free of any electrical or magnetic irregularities (e.g., chrome plating, magnetised spots). Cable routing must avoid high-voltage power lines and other sources of electromagnetic interference. All ClickLoc connectors must be fully engaged to ensure a secure connection.

21504-00-32-10-02 | Bently Nevada | Vibration Probe
Technical Overview
The Bently Nevada 21504-00-32-10-02 is a 3300 NSv series proximity vibration probe, a fundamental component of an eddy current transducer system designed for non-contact displacement and vibration measurement on rotating machinery. Its primary function is to measure the distance (gap) between the probe tip and a conductive target material, typically a machine shaft. The probe operates by generating a high-frequency radio frequency (RF) field from its tip coil. When brought near the conductive target, this field induces eddy currents on the target's surface. These eddy currents alter the impedance of the probe's coil system. This change in impedance is detected by an associated Proximitor Sensor, which demodulates the signal into a voltage directly proportional to the probe-to-target gap. This analog voltage signal is then transmitted to a monitoring system, such as the Bently Nevada 3500 Machinery Protection System, for real-time analysis, trending, and alarming. The 21504-00-32-10-02 is constructed with a stainless steel case for durability in industrial environments and is specifically configured with a 320 mm case length and a 1.0-meter integral cable.
Detailed Specifications
Parameter Specification
Manufacturer Bently Nevada
Part Number 21504-00-32-10-02
Product Type 3300 NSv Proximity Vibration Probe
Condition Brand New
Warranty 12 Months
Unthreaded Length 0 mm
Case Length 320 mm (12.6 in)
Total Length 1.0 metre (3.3 feet)
Connector Type Miniature coaxial ClickLoc connector, standard cable
Probe Tip Material Polyphenylene Sulfide (PPS)
Case Material AISI 304 Stainless Steel
System Linear Range 2 mm (80 mils)
System Scale Factor 7.87 V/mm (200 mV/mil) with 3300 NSv Proximitor
Operational Capabilities
In Oil & Gas and Power Generation applications, the 21504-00-32-10-02 probe demonstrates high reliability for continuous monitoring of critical assets such as gas and steam turbines, compressors, and large pump motors. Its non-contacting measurement principle eliminates mechanical wear, contributing to a high Mean Time Between Failures (MTBF) for the overall protection system. The probe is engineered to operate reliably in harsh industrial conditions. The probe tip is rated for continuous operation from -34 °C to +177 °C (-29 °F to +351 °F). The robust stainless steel case provides protection against physical impact and contaminants common in plant environments. When installed as part of a complete 3300 NSv transducer system, it provides a stable and repeatable measurement essential for machine protection and condition monitoring programs, enabling early detection of developing faults like imbalance, misalignment, and fluid-induced instabilities.
Applications
Power generation turbines and generators
Oil & gas compressors and pumps
Industrial rotating machinery monitoring
Predictive maintenance systems
Process automation
Technical FAQ
Q: What systems is the 21504-00-32-10-02 compatible with?
A: The 21504-00-32-10-02 probe is a component of the Bently Nevada 3300 NSv Proximity Transducer System. For correct operation, it must be used in conjunction with a 3300 NSv extension cable and a 3300 NSv Proximitor Sensor. The output from the Proximitor Sensor is compatible with Bently Nevada monitoring systems, including the 3500 and 3300 series, as well as any data acquisition system, PLC, or DCS capable of accepting a -24 Vdc powered, 7.87 V/mm (200 mV/mil) analog signal.
Q: What are the installation requirements?
A: Proper installation is critical for measurement accuracy. The probe must be mounted perpendicular to the target surface using a rigid bracket. The physical gap should be set to place the DC output voltage in the middle of the system's linear range, typically -10 Vdc. The target area on the shaft must be at least 10.7 mm (0.42 in) in diameter, smooth (0.4 to 0.8 µm / 16 to 32 µin rms), and free of any electrical or magnetic irregularities (e.g., chrome plating, magnetised spots). Cable routing must avoid high-voltage power lines and other sources of electromagnetic interference. All ClickLoc connectors must be fully engaged to ensure a secure connection.

330102-00-60-10-01-05 | Bently Nevada | 3300 XL 8 mm Proximity Probes — 330102-00-60-10-01-05 | Bently Nevada | 3300 XL 8 mm Proximity Probes
Technical Overview
The Bently Nevada 330102-00-60-10-01-05 is an 8 mm reverse-mount eddy current proximity probe designed for non-contact measurement of vibration and displacement. It functions as a core component of the 3300 XL 8 mm Proximity Transducer System, which also includes an extension cable and a Proximitor Sensor. The probe operates by having the Proximitor Sensor generate a high-frequency radio frequency (RF) signal, which is transmitted through the extension cable and radiated from the probe's tip into a small electromagnetic field. When a conductive target, such as a machine shaft, enters this field, eddy currents are induced on its surface. These currents create a secondary magnetic field that opposes the primary field, causing a measurable change in the RF signal's amplitude. This change is directly proportional to the gap between the probe tip and the target surface. The Proximitor Sensor demodulates this signal, converting it into a DC voltage that accurately represents the physical distance. This conditioned voltage signal is then transmitted to a monitoring system, such as the Bently Nevada 3500, for real-time analysis of radial vibration, axial position, and shaft speed.
Detailed Specifications
Parameter Specification
Manufacturer Bently Nevada
Part Number 330102-00-60-10-01-05
Product Type 3300 XL 8 mm Reverse Mount Proximity Probe
Condition Brand New
Warranty 12 Months
Total Length 1.0 meter (3.3 feet)
Case Length 6.0 inches (152 mm)
Mounting Option Reverse Mount
Connector Type Miniature coaxial ClickLoc™ connector, gold-plated
Probe Tip Material Polyphenylene Sulfide (PPS)
Probe Case Material AISI 304 Stainless Steel
Agency Approvals Multiple Approvals: CSA (Class I, Div 1/2), ATEX/IECEx (Zone 0/1)
Operational Capabilities
In Oil & Gas and Power Generation applications, the 330102-00-60-10-01-05 probe demonstrates high reliability in demanding operational environments. Its construction with a PPS tip and stainless steel case allows for continuous operation in temperatures ranging from -34 °C to +177 °C (-29 °F to +350 °F). The gold-plated ClickLoc connector provides a secure, corrosion-resistant connection that prevents signal degradation from fluid ingress or vibration-induced intermittence. When paired with a 3300 XL Proximitor Sensor, the system provides a linear measurement range of 2.0 mm (80 mils) with a scale factor of 7.87 V/mm (200 mV/mil), ensuring precise data for machine diagnostics. The system is designed for high immunity to radio frequency interference (RFI), minimizing signal corruption in electrically noisy industrial environments. The probe's physical durability and signal integrity are critical for monitoring high-speed turbomachinery, where accurate measurement of shaft dynamics is essential for preventing catastrophic failure.
Applications
Power generation turbines and generators
Oil & gas compressors and pumps
Industrial rotating machinery monitoring
Predictive maintenance systems
Process automation
Technical FAQ
Q: What systems is the 330102-00-60-10-01-05 compatible with?
A: The 330102-00-60-10-01-05 probe is a component of the 3300 XL 8 mm Transducer System. For proper operation, it must be used with a 3300 XL extension cable and a 3300 XL Proximitor Sensor (e.g., part number 330180). This complete transducer system is fully compatible with Bently Nevada monitoring systems, including the 3500 Series Machinery Protection System and ADRE Sxp/408 DSPi data acquisition systems. It is not electrically or mechanically compatible with components from other transducer series, such as the 7200 or 3000 series.
Q: What are the installation requirements?
A: As a reverse-mount probe, the 330102-00-60-10-01-05 is installed from inside the machine housing, with the probe body extending outward. A clearance hole must be drilled through the machine case to accommodate the 8 mm probe tip. The target area on the observed shaft must be smooth, free of surface defects, and have a minimum diameter of 10.7 mm (0.42 in) to ensure measurement accuracy. The probe's gap should be set to the center of its linear range, typically corresponding to -10.0 Vdc. The ClickLoc connector must be tightened to the specified torque to ensure a secure, environmentally sealed connection. Cable routing must avoid areas of extreme heat, physical abrasion, and proximity to high-voltage power lines to maintain signal integrity.

330102-00-60-10-01-05 | Bently Nevada | 3300 XL 8 mm Proximity Probes
Technical Overview
The Bently Nevada 330102-00-60-10-01-05 is an 8 mm reverse-mount eddy current proximity probe designed for non-contact measurement of vibration and displacement. It functions as a core component of the 3300 XL 8 mm Proximity Transducer System, which also includes an extension cable and a Proximitor Sensor. The probe operates by having the Proximitor Sensor generate a high-frequency radio frequency (RF) signal, which is transmitted through the extension cable and radiated from the probe's tip into a small electromagnetic field. When a conductive target, such as a machine shaft, enters this field, eddy currents are induced on its surface. These currents create a secondary magnetic field that opposes the primary field, causing a measurable change in the RF signal's amplitude. This change is directly proportional to the gap between the probe tip and the target surface. The Proximitor Sensor demodulates this signal, converting it into a DC voltage that accurately represents the physical distance. This conditioned voltage signal is then transmitted to a monitoring system, such as the Bently Nevada 3500, for real-time analysis of radial vibration, axial position, and shaft speed.
Detailed Specifications
Parameter Specification
Manufacturer Bently Nevada
Part Number 330102-00-60-10-01-05
Product Type 3300 XL 8 mm Reverse Mount Proximity Probe
Condition Brand New
Warranty 12 Months
Total Length 1.0 meter (3.3 feet)
Case Length 6.0 inches (152 mm)
Mounting Option Reverse Mount
Connector Type Miniature coaxial ClickLoc™ connector, gold-plated
Probe Tip Material Polyphenylene Sulfide (PPS)
Probe Case Material AISI 304 Stainless Steel
Agency Approvals Multiple Approvals: CSA (Class I, Div 1/2), ATEX/IECEx (Zone 0/1)
Operational Capabilities
In Oil & Gas and Power Generation applications, the 330102-00-60-10-01-05 probe demonstrates high reliability in demanding operational environments. Its construction with a PPS tip and stainless steel case allows for continuous operation in temperatures ranging from -34 °C to +177 °C (-29 °F to +350 °F). The gold-plated ClickLoc connector provides a secure, corrosion-resistant connection that prevents signal degradation from fluid ingress or vibration-induced intermittence. When paired with a 3300 XL Proximitor Sensor, the system provides a linear measurement range of 2.0 mm (80 mils) with a scale factor of 7.87 V/mm (200 mV/mil), ensuring precise data for machine diagnostics. The system is designed for high immunity to radio frequency interference (RFI), minimizing signal corruption in electrically noisy industrial environments. The probe's physical durability and signal integrity are critical for monitoring high-speed turbomachinery, where accurate measurement of shaft dynamics is essential for preventing catastrophic failure.
Applications
Power generation turbines and generators
Oil & gas compressors and pumps
Industrial rotating machinery monitoring
Predictive maintenance systems
Process automation
Technical FAQ
Q: What systems is the 330102-00-60-10-01-05 compatible with?
A: The 330102-00-60-10-01-05 probe is a component of the 3300 XL 8 mm Transducer System. For proper operation, it must be used with a 3300 XL extension cable and a 3300 XL Proximitor Sensor (e.g., part number 330180). This complete transducer system is fully compatible with Bently Nevada monitoring systems, including the 3500 Series Machinery Protection System and ADRE Sxp/408 DSPi data acquisition systems. It is not electrically or mechanically compatible with components from other transducer series, such as the 7200 or 3000 series.
Q: What are the installation requirements?
A: As a reverse-mount probe, the 330102-00-60-10-01-05 is installed from inside the machine housing, with the probe body extending outward. A clearance hole must be drilled through the machine case to accommodate the 8 mm probe tip. The target area on the observed shaft must be smooth, free of surface defects, and have a minimum diameter of 10.7 mm (0.42 in) to ensure measurement accuracy. The probe's gap should be set to the center of its linear range, typically corresponding to -10.0 Vdc. The ClickLoc connector must be tightened to the specified torque to ensure a secure, environmentally sealed connection. Cable routing must avoid areas of extreme heat, physical abrasion, and proximity to high-voltage power lines to maintain signal integrity.

84661-67 | Bently Nevada | Velomitor Interconnect Cable — 84661-67 | Bently Nevada | Velomitor Interconnect Cable
Technical Overview
The Bently Nevada 84661-67 is a specialized interconnect cable engineered for the transmission of low-level analog signals from Velomitor piezo-velocity sensors to a machinery protection system. Its primary function is to provide a reliable, noise-immune physical link between a sensor mounted on rotating machinery and a monitoring module, such as the Bently Nevada 3500/42M. The cable is constructed with a shielded, twisted-pair configuration using 22 AWG conductors. This design is critical for preserving the integrity of the millivolt-level velocity signal by minimizing interference from electromagnetic (EMI) and radio frequency (RFI) sources common in industrial environments. The 84661-67 cable transmits the dynamic voltage signal proportional to the machine's case vibration velocity, enabling the 3500 system to perform accurate vibration analysis and machinery diagnostics. The cable features a ruggedized jacket for resistance to industrial chemicals and abrasion, and its specific length and connectorization are designed for seamless integration without field modification, ensuring consistent system performance and measurement accuracy.
Detailed Specifications
Parameter Specification
Manufacturer Bently Nevada
Part Number 84661-67
Product Type Velomitor Interconnect Cable
Condition Brand New
Warranty 12 Months
Cable Length 67 feet (20.4 meters)
Cable Construction Shielded, twisted pair, 22 AWG (0.34 mm²) conductors
Sensor End Connector 2-socket MIL-C-5015 style, environmentally sealed
Monitor End Connection Prepared leads for terminal block installation on 3500/42M I/O module
Shielding Overall aluminum/polyester foil shield with tinned copper drain wire
Jacket Material Chlorinated Polyethylene (CPE) for oil and chemical resistance
Operating Temperature Range -30°C to +100°C (-22°F to +212°F)
Operational Capabilities
In Oil & Gas and Power Generation applications, the 84661-67 interconnect cable demonstrates high reliability and signal fidelity under demanding operational conditions. Its robust CPE jacket provides protection against hydrocarbons, corrosive chemicals, and mechanical abrasion frequently encountered in these environments. The specified operating temperature range of -30°C to +100°C ensures consistent performance from cold startups to high-temperature operating conditions near turbines, compressors, and pumps. The cable's shielding effectiveness is critical for transmitting clean, low-noise vibration signals from Velomitor sensors, which is essential for the accurate detection of machinery faults such as imbalance, misalignment, and bearing degradation. Proper installation, including correct shield grounding at the monitor end only, prevents ground loops and ensures the high signal-to-noise ratio required for the advanced diagnostic algorithms within the 3500 monitoring system.
Applications
Power generation turbines and generators
Oil & gas compressors and pumps
Industrial rotating machinery monitoring
Predictive maintenance systems
Process automation
Technical FAQ
Q: What systems is the 84661-67 compatible with?
A: The 84661-67 cable is designed primarily for use with the Bently Nevada 3500 Machinery Protection System, connecting directly to the terminal block of a 3500/42M Velomitor/Seismic Monitor I/O Module. It is compatible with Bently Nevada Velomitor sensors, including the 330500 and 330525 models, and other piezo-velocity sensors that utilize a 2-pin MIL-C-5015 style connector and have similar output characteristics.
Q: What are the installation requirements?
A: Proper installation is critical for signal integrity. 1) Route the 84661-67 cable in dedicated instrument trays or conduit, separated from high-voltage power cables to prevent induced noise. 2) The cable shield drain wire must be terminated at the instrument ground (GND) terminal on the 3500/42M I/O module. Do not connect the shield at the sensor end to prevent ground loops. 3) Ensure the connector at the sensor is fully seated and the locking ring is tightened to maintain the environmental seal. 4) Secure the cable with appropriate clamps to provide strain relief and prevent vibration-induced damage to the cable or connectors. Adhere to a minimum bend radius of 10 times the cable's outer diameter.

84661-67 | Bently Nevada | Velomitor Interconnect Cable
Technical Overview
The Bently Nevada 84661-67 is a specialized interconnect cable engineered for the transmission of low-level analog signals from Velomitor piezo-velocity sensors to a machinery protection system. Its primary function is to provide a reliable, noise-immune physical link between a sensor mounted on rotating machinery and a monitoring module, such as the Bently Nevada 3500/42M. The cable is constructed with a shielded, twisted-pair configuration using 22 AWG conductors. This design is critical for preserving the integrity of the millivolt-level velocity signal by minimizing interference from electromagnetic (EMI) and radio frequency (RFI) sources common in industrial environments. The 84661-67 cable transmits the dynamic voltage signal proportional to the machine's case vibration velocity, enabling the 3500 system to perform accurate vibration analysis and machinery diagnostics. The cable features a ruggedized jacket for resistance to industrial chemicals and abrasion, and its specific length and connectorization are designed for seamless integration without field modification, ensuring consistent system performance and measurement accuracy.
Detailed Specifications
Parameter Specification
Manufacturer Bently Nevada
Part Number 84661-67
Product Type Velomitor Interconnect Cable
Condition Brand New
Warranty 12 Months
Cable Length 67 feet (20.4 meters)
Cable Construction Shielded, twisted pair, 22 AWG (0.34 mm²) conductors
Sensor End Connector 2-socket MIL-C-5015 style, environmentally sealed
Monitor End Connection Prepared leads for terminal block installation on 3500/42M I/O module
Shielding Overall aluminum/polyester foil shield with tinned copper drain wire
Jacket Material Chlorinated Polyethylene (CPE) for oil and chemical resistance
Operating Temperature Range -30°C to +100°C (-22°F to +212°F)
Operational Capabilities
In Oil & Gas and Power Generation applications, the 84661-67 interconnect cable demonstrates high reliability and signal fidelity under demanding operational conditions. Its robust CPE jacket provides protection against hydrocarbons, corrosive chemicals, and mechanical abrasion frequently encountered in these environments. The specified operating temperature range of -30°C to +100°C ensures consistent performance from cold startups to high-temperature operating conditions near turbines, compressors, and pumps. The cable's shielding effectiveness is critical for transmitting clean, low-noise vibration signals from Velomitor sensors, which is essential for the accurate detection of machinery faults such as imbalance, misalignment, and bearing degradation. Proper installation, including correct shield grounding at the monitor end only, prevents ground loops and ensures the high signal-to-noise ratio required for the advanced diagnostic algorithms within the 3500 monitoring system.
Applications
Power generation turbines and generators
Oil & gas compressors and pumps
Industrial rotating machinery monitoring
Predictive maintenance systems
Process automation
Technical FAQ
Q: What systems is the 84661-67 compatible with?
A: The 84661-67 cable is designed primarily for use with the Bently Nevada 3500 Machinery Protection System, connecting directly to the terminal block of a 3500/42M Velomitor/Seismic Monitor I/O Module. It is compatible with Bently Nevada Velomitor sensors, including the 330500 and 330525 models, and other piezo-velocity sensors that utilize a 2-pin MIL-C-5015 style connector and have similar output characteristics.
Q: What are the installation requirements?
A: Proper installation is critical for signal integrity. 1) Route the 84661-67 cable in dedicated instrument trays or conduit, separated from high-voltage power cables to prevent induced noise. 2) The cable shield drain wire must be terminated at the instrument ground (GND) terminal on the 3500/42M I/O module. Do not connect the shield at the sensor end to prevent ground loops. 3) Ensure the connector at the sensor is fully seated and the locking ring is tightened to maintain the environmental seal. 4) Secure the cable with appropriate clamps to provide strain relief and prevent vibration-induced damage to the cable or connectors. Adhere to a minimum bend radius of 10 times the cable's outer diameter.

330881-28-04-034-06-02 | Bently Nevada | PROXPAC XL Proximity Transducer — 330881-28-04-034-06-02 | Bently Nevada | PROXPAC XL Proximity Transducer
Technical Overview
The Bently Nevada 330881-28-04-034-06-02 is an integrated PROXPAC XL Proximity Transducer system. This component combines an 8 mm proximity probe, an extension cable, and a signal conditioner into a single, factory-calibrated assembly, which eliminates the need for individual component calibration in the field. The transducer operates on the eddy current principle. The probe tip emits a high-frequency radio frequency (RF) signal, which induces eddy currents on the surface of a conductive machine element, such as a rotating shaft. The transducer's internal circuitry measures the impedance changes resulting from the interaction between the RF field and the eddy currents. This impedance is directly proportional to the physical gap between the probe tip and the target surface. The integrated signal conditioner demodulates this signal and provides a continuous DC voltage output that is precisely proportional to the measured gap. This output voltage is then transmitted to a monitoring system, such as the Bently Nevada 3500 series, for analysis of vibration, axial position, or rotational speed. The construction of the 330881-28-04-034-06-02 ensures high signal integrity by minimizing interconnections, making it suitable for critical machinery monitoring applications.
Detailed Specifications
Parameter Specification
Manufacturer Bently Nevada
Part Number 330881-28-04-034-06-02
Product Type PROXPAC XL Proximity Transducer
Condition Brand New
Warranty 12 Months
Total System Length 2.8 metres (9.2 feet)
Probe Configuration 3300 XL 8 mm probe, 1/4-28 UNF thread, 0.5 m cable
Agency Approvals Multiple Approvals: CSA (Class I, Div 1/2); ATEX/IECEx (Zone 0/1)
Scale Factor 8.0 V/mm (200 mV/mil), ±5% for AISI 4140 Steel
Linear Range 2.0 mm (80 mils), beginning at 0.25 mm (10 mils) from the probe face
Frequency Response 0 Hz (DC) to 10 kHz (-3 dB)
Power Supply Requirement -17.5 Vdc to -26 Vdc at 12 mA maximum consumption
Mounting Option Panel Mount, 4-Hole Square Flange
Operational Capabilities
In Oil & Gas and Power Generation applications, the 330881-28-04-034-06-02 provides continuous, online data for machinery protection and condition monitoring. It is engineered for measuring radial vibration, axial thrust position, and differential expansion on large rotating equipment such as gas and steam turbines, centrifugal and reciprocating compressors, and large pump motors. The integrated design enhances reliability by eliminating the connectors between the probe, extension cable, and Proximitor sensor, which are common points of failure and signal degradation due to moisture ingress or vibration. The factory-calibrated system ensures measurement consistency and accuracy without field adjustments. Environmentally, the 330881-28-04-034-06-02 is specified with multiple agency approvals (CSA, ATEX, IECEx), certifying it for safe operation in hazardous areas with explosive gas atmospheres (e.g., Class I, Division 1; Zone 0). The electronics housing is rated for an operating temperature of -34 °C to +85 °C (-30 °F to +185 °F), ensuring performance in demanding industrial environments.
Applications
Power generation turbines and generators
Oil & gas compressors and pumps
Industrial rotating machinery monitoring
Predictive maintenance systems
Process automation
Technical FAQ
Q: What systems is the 330881-28-04-034-06-02 compatible with?
A: The 330881-28-04-034-06-02 is fully compatible with the Bently Nevada 3500 Machinery Protection System, specifically interfacing with modules such as the 3500/42M Proximitor/Seismic Monitor. It is also compatible with any PLC, DCS, or data acquisition system that can provide a -17.5 Vdc to -26 Vdc power supply and accept a proportional analog voltage input (typically configured for a range like -2 to -18 Vdc). The transducer is factory-calibrated for AISI 4140 steel; use with other target materials will require a different calibration or result in measurement inaccuracies.
Q: What are the installation requirements?
A: Installation requires both mechanical mounting and electrical wiring. The probe portion, with its 1/4-28 UNF thread, must be installed in a rigid bracket and its gap set relative to the machine shaft. The standard practice is to set the DC gap voltage to the center of the linear range (e.g., -10.0 V

330881-28-04-034-06-02 | Bently Nevada | PROXPAC XL Proximity Transducer
Technical Overview
The Bently Nevada 330881-28-04-034-06-02 is an integrated PROXPAC XL Proximity Transducer system. This component combines an 8 mm proximity probe, an extension cable, and a signal conditioner into a single, factory-calibrated assembly, which eliminates the need for individual component calibration in the field. The transducer operates on the eddy current principle. The probe tip emits a high-frequency radio frequency (RF) signal, which induces eddy currents on the surface of a conductive machine element, such as a rotating shaft. The transducer's internal circuitry measures the impedance changes resulting from the interaction between the RF field and the eddy currents. This impedance is directly proportional to the physical gap between the probe tip and the target surface. The integrated signal conditioner demodulates this signal and provides a continuous DC voltage output that is precisely proportional to the measured gap. This output voltage is then transmitted to a monitoring system, such as the Bently Nevada 3500 series, for analysis of vibration, axial position, or rotational speed. The construction of the 330881-28-04-034-06-02 ensures high signal integrity by minimizing interconnections, making it suitable for critical machinery monitoring applications.
Detailed Specifications
Parameter Specification
Manufacturer Bently Nevada
Part Number 330881-28-04-034-06-02
Product Type PROXPAC XL Proximity Transducer
Condition Brand New
Warranty 12 Months
Total System Length 2.8 metres (9.2 feet)
Probe Configuration 3300 XL 8 mm probe, 1/4-28 UNF thread, 0.5 m cable
Agency Approvals Multiple Approvals: CSA (Class I, Div 1/2); ATEX/IECEx (Zone 0/1)
Scale Factor 8.0 V/mm (200 mV/mil), ±5% for AISI 4140 Steel
Linear Range 2.0 mm (80 mils), beginning at 0.25 mm (10 mils) from the probe face
Frequency Response 0 Hz (DC) to 10 kHz (-3 dB)
Power Supply Requirement -17.5 Vdc to -26 Vdc at 12 mA maximum consumption
Mounting Option Panel Mount, 4-Hole Square Flange
Operational Capabilities
In Oil & Gas and Power Generation applications, the 330881-28-04-034-06-02 provides continuous, online data for machinery protection and condition monitoring. It is engineered for measuring radial vibration, axial thrust position, and differential expansion on large rotating equipment such as gas and steam turbines, centrifugal and reciprocating compressors, and large pump motors. The integrated design enhances reliability by eliminating the connectors between the probe, extension cable, and Proximitor sensor, which are common points of failure and signal degradation due to moisture ingress or vibration. The factory-calibrated system ensures measurement consistency and accuracy without field adjustments. Environmentally, the 330881-28-04-034-06-02 is specified with multiple agency approvals (CSA, ATEX, IECEx), certifying it for safe operation in hazardous areas with explosive gas atmospheres (e.g., Class I, Division 1; Zone 0). The electronics housing is rated for an operating temperature of -34 °C to +85 °C (-30 °F to +185 °F), ensuring performance in demanding industrial environments.
Applications
Power generation turbines and generators
Oil & gas compressors and pumps
Industrial rotating machinery monitoring
Predictive maintenance systems
Process automation
Technical FAQ
Q: What systems is the 330881-28-04-034-06-02 compatible with?
A: The 330881-28-04-034-06-02 is fully compatible with the Bently Nevada 3500 Machinery Protection System, specifically interfacing with modules such as the 3500/42M Proximitor/Seismic Monitor. It is also compatible with any PLC, DCS, or data acquisition system that can provide a -17.5 Vdc to -26 Vdc power supply and accept a proportional analog voltage input (typically configured for a range like -2 to -18 Vdc). The transducer is factory-calibrated for AISI 4140 steel; use with other target materials will require a different calibration or result in measurement inaccuracies.
Q: What are the installation requirements?
A: Installation requires both mechanical mounting and electrical wiring. The probe portion, with its 1/4-28 UNF thread, must be installed in a rigid bracket and its gap set relative to the machine shaft. The standard practice is to set the DC gap voltage to the center of the linear range (e.g., -10.0 V

21000-27-05-40-026-03-02 | Bently Nevada | Proximity ProbeHousing Assemblies — 21000-27-05-40-026-03-02 | Bently Nevada | Proximity ProbeHousing Assemblies
Technical Overview
The Bently Nevada 21000-27-05-40-026-03-02 is a proximity probe housing assembly designed to provide a secure, environmentally sealed, and adjustable mounting for proximity probes on industrial machinery. Its primary function is to protect the sensitive probe element from the harsh process environment (e.g., high pressure, corrosive gases, liquids) while allowing precise positioning relative to the observed machine shaft. This specific assembly is constructed from 316 Stainless Steel for superior corrosion resistance. It features a 3/4-14 NPT mounting thread for direct installation into the machine casing. The assembly houses a 3300 XL 8 mm probe, which operates on the eddy current principle. The probe, connected via an extension cable to a Proximitor Sensor, transmits a high-frequency RF signal. The proximity of the conductive shaft surface modulates this signal, which the Proximitor Sensor demodulates into a DC voltage proportional to the probe-to-shaft gap. This conditioned signal is then supplied to a Bently Nevada 3500 Machinery Protection System for continuous monitoring of radial vibration, axial position, and rotational speed.
Detailed Specifications
Parameter Specification
Manufacturer Bently Nevada
Part Number 21000-27-05-40-026-03-02
Product Type Proximity Probe Housing Assembly
Condition Brand New
Warranty 12 Months
Housing Material 316 Stainless Steel
Mounting Thread 3/4-14 NPT
Probe Penetration Length 400 mm (15.7 in)
Standoff Length 50 mm (2.0 in)
Included Probe Option 3300 XL 8 mm probe, 1.0 metre cable, miniature coaxial connector
Fittings Option One 3/4-14 NPT plug provided
Housing Operating Temperature -34 °C to +177 °C (-29 °F to +350 °F)
Operational Capabilities
In Oil & Gas and Power Generation applications, the 21000-27-05-40-026-03-02 assembly provides a robust and reliable platform for critical machinery monitoring. Its 316 Stainless Steel construction ensures long-term integrity in environments containing hydrogen sulfide (H2S), chlorides, and other corrosive agents common in refineries and offshore platforms. The NPT thread mounting, when installed with appropriate sealant, creates a high-pressure seal, preventing the escape of process gases or liquids. This is critical for safety and environmental compliance on equipment such as centrifugal compressors and high-pressure pumps. The assembly's design facilitates stable probe gapping, which is essential for the accuracy and repeatability of vibration and position measurements required for API 670 compliant protection systems. The housing is engineered for continuous, long-term service with minimal maintenance, contributing to high machine availability and reduced lifecycle costs for critical assets like gas turbines, steam turbines, and generators.
Applications
Power generation turbines and generators
Oil & gas compressors and pumps
Industrial rotating machinery monitoring
Predictive maintenance systems
Process automation
Technical FAQ
Q: What systems is the 21000-27-05-40-026-03-02 compatible with?
A: The 3300 XL 8 mm probe included with the 21000-27-05-40-026-03-02 assembly is part of a transducer system that requires a matching 3300 XL extension cable and a 3300 XL Proximitor Sensor. The complete transducer system output is fully compatible with Bently Nevada machinery protection and condition monitoring systems, including the 3500 Series (e.g., 3500/42M Proximitor/Seismic Monitor), 3300 Series Monitors, and ADRE data acquisition systems. The housing's 3/4-14 NPT mechanical interface is compatible with any machine case drilled and tapped to this standard thread size.
Q: What are the installation requirements?
A: Installation requires a 3/4-14 NPT tapped hole at the measurement location on the machine casing. An appropriate thread sealant (e.g., PTFE tape or pipe dope compatible with the process fluid and temperature) must be applied to the mounting threads to ensure a pressure-tight seal. The probe must be gapped by adjusting its position within the housing to achieve the correct DC voltage output (typically -10.0 Vdc for a 3300 XL 8 mm system) when measured at the Proximitor Sensor's output terminals. After gapping, the probe is secured in place using the housing's set screws. Adherence to Bently Nevada's specified torque values for the housing and any fittings is mandatory to prevent damage and ensure seal integrity.

21000-27-05-40-026-03-02 | Bently Nevada | Proximity ProbeHousing Assemblies
Technical Overview
The Bently Nevada 21000-27-05-40-026-03-02 is a proximity probe housing assembly designed to provide a secure, environmentally sealed, and adjustable mounting for proximity probes on industrial machinery. Its primary function is to protect the sensitive probe element from the harsh process environment (e.g., high pressure, corrosive gases, liquids) while allowing precise positioning relative to the observed machine shaft. This specific assembly is constructed from 316 Stainless Steel for superior corrosion resistance. It features a 3/4-14 NPT mounting thread for direct installation into the machine casing. The assembly houses a 3300 XL 8 mm probe, which operates on the eddy current principle. The probe, connected via an extension cable to a Proximitor Sensor, transmits a high-frequency RF signal. The proximity of the conductive shaft surface modulates this signal, which the Proximitor Sensor demodulates into a DC voltage proportional to the probe-to-shaft gap. This conditioned signal is then supplied to a Bently Nevada 3500 Machinery Protection System for continuous monitoring of radial vibration, axial position, and rotational speed.
Detailed Specifications
Parameter Specification
Manufacturer Bently Nevada
Part Number 21000-27-05-40-026-03-02
Product Type Proximity Probe Housing Assembly
Condition Brand New
Warranty 12 Months
Housing Material 316 Stainless Steel
Mounting Thread 3/4-14 NPT
Probe Penetration Length 400 mm (15.7 in)
Standoff Length 50 mm (2.0 in)
Included Probe Option 3300 XL 8 mm probe, 1.0 metre cable, miniature coaxial connector
Fittings Option One 3/4-14 NPT plug provided
Housing Operating Temperature -34 °C to +177 °C (-29 °F to +350 °F)
Operational Capabilities
In Oil & Gas and Power Generation applications, the 21000-27-05-40-026-03-02 assembly provides a robust and reliable platform for critical machinery monitoring. Its 316 Stainless Steel construction ensures long-term integrity in environments containing hydrogen sulfide (H2S), chlorides, and other corrosive agents common in refineries and offshore platforms. The NPT thread mounting, when installed with appropriate sealant, creates a high-pressure seal, preventing the escape of process gases or liquids. This is critical for safety and environmental compliance on equipment such as centrifugal compressors and high-pressure pumps. The assembly's design facilitates stable probe gapping, which is essential for the accuracy and repeatability of vibration and position measurements required for API 670 compliant protection systems. The housing is engineered for continuous, long-term service with minimal maintenance, contributing to high machine availability and reduced lifecycle costs for critical assets like gas turbines, steam turbines, and generators.
Applications
Power generation turbines and generators
Oil & gas compressors and pumps
Industrial rotating machinery monitoring
Predictive maintenance systems
Process automation
Technical FAQ
Q: What systems is the 21000-27-05-40-026-03-02 compatible with?
A: The 3300 XL 8 mm probe included with the 21000-27-05-40-026-03-02 assembly is part of a transducer system that requires a matching 3300 XL extension cable and a 3300 XL Proximitor Sensor. The complete transducer system output is fully compatible with Bently Nevada machinery protection and condition monitoring systems, including the 3500 Series (e.g., 3500/42M Proximitor/Seismic Monitor), 3300 Series Monitors, and ADRE data acquisition systems. The housing's 3/4-14 NPT mechanical interface is compatible with any machine case drilled and tapped to this standard thread size.
Q: What are the installation requirements?
A: Installation requires a 3/4-14 NPT tapped hole at the measurement location on the machine casing. An appropriate thread sealant (e.g., PTFE tape or pipe dope compatible with the process fluid and temperature) must be applied to the mounting threads to ensure a pressure-tight seal. The probe must be gapped by adjusting its position within the housing to achieve the correct DC voltage output (typically -10.0 Vdc for a 3300 XL 8 mm system) when measured at the Proximitor Sensor's output terminals. After gapping, the probe is secured in place using the housing's set screws. Adherence to Bently Nevada's specified torque values for the housing and any fittings is mandatory to prevent damage and ensure seal integrity.

Bently Nevada 21000-16-10-15-075-03-02 Proximity Probe HousingAssemblies — Bently Nevada 21000-16-10-15-075-03-02 Proximity Probe HousingAssemblies
Technical Overview
The Bently Nevada 21000-16-10-15-075-03-02 is a genuine industrial component designed for critical automation systems. This high-quality product delivers reliable performance in demanding industrial environments.
Detailed Specifications
Parameter Specification
Manufacturer Bently Nevada
Part Number 21000-16-10-15-075-03-02
Condition Brand New
Warranty 12 Months
Applications
Industrial automation systems
Process control applications
Manufacturing equipment
Power generation systems
Technical FAQ
Q: Is this a genuine Bently Nevada product?
A: Yes, this is a 100% genuine product with full manufacturer warranty.
Q: What is the warranty period?
A: All products come with a standard 12-month warranty.

Bently Nevada 21000-16-10-15-075-03-02 Proximity Probe HousingAssemblies
Technical Overview
The Bently Nevada 21000-16-10-15-075-03-02 is a genuine industrial component designed for critical automation systems. This high-quality product delivers reliable performance in demanding industrial environments.
Detailed Specifications
Parameter Specification
Manufacturer Bently Nevada
Part Number 21000-16-10-15-075-03-02
Condition Brand New
Warranty 12 Months
Applications
Industrial automation systems
Process control applications
Manufacturing equipment
Power generation systems
Technical FAQ
Q: Is this a genuine Bently Nevada product?
A: Yes, this is a 100% genuine product with full manufacturer warranty.
Q: What is the warranty period?
A: All products come with a standard 12-month warranty.