You are here:
- Home
- Product
- Power Electronics
- Power Supply & Power Modules
- Honeywell FC-PSU-240516 Safety Power Supply Unit
SKU: FC-PSU-240516
Honeywell FC-PSU-240516 Safety Power Supply Unit
The Honeywell FC-PSU-240516 is a 24V DC safety-certified power supply for Safety Manager and FSC systems. It features a fault-tolerant design, integrated redundancy diodes, and advanced diagnostic contacts to ensure continuous operation of critical safety loops.
Technical Overview and Functional Description
The Honeywell FC-PSU-240516 is a high-reliability power supply module engineered specifically for the Safety Manager and Fail-Safe Controller (FSC) platforms. This unit converts primary AC or DC input power into a stable, regulated 24V DC output to energize critical safety-related components, including controllers, I/O modules, and field sensors. Consequently, this module serves as the foundation for system stability, ensuring that safety-instrumented functions (SIF) remain active even under fluctuating electrical conditions.
Furthermore, the FC-PSU-240516 incorporates an integrated power management architecture that supports redundant configurations. Because the module includes built-in decoupling diodes, users can connect multiple units in parallel to create a fault-tolerant power bus. If one supply fails, the secondary unit assumes the full load instantaneously without any drop in output voltage. Additionally, the unit features advanced over-voltage and over-current protection mechanisms, which safeguard sensitive downstream electronics from electrical surges or internal component failures.
Moreover, this power supply provides comprehensive diagnostic feedback through dedicated status contacts and visual indicators. Therefore, maintenance personnel can monitor the “Power OK” status in real-time and integrate these alerts into the DCS alarm management system. Due to its ruggedized industrial design and convection-cooled chassis, the FC-PSU-240516 operates reliably in demanding environments, maintaining a high Mean Time Between Failures (MTBF) essential for SIL-rated safety systems.
Key Technical Specifications
- Manufacturer: HoneywellÂ
- Model Identifier: FC-PSU-240516
- Product Category: Regulated Safety Power Supply
- Nominal Output Voltage: 24V DC
- Output Current Rating: 5A (Typical for 240516 series)
- System Compatibility: Honeywell Safety Manager / FSC Systems
- Redundancy: Built-in diode oring for parallel operation
- Protection Class: Over-voltage (OVP) and short-circuit protection
- Mounting Type: Standard Safety Manager rack or subrack mounting
- Diagnostics: Integrated potential-free alarm contacts and LED status
You may also like
The Honeywell FC-TSDI-1624C is a SIL2-certified 16-channel safe digital input module. It features 24VDC operation and a 1ms response time for critical safety monitoring. This hot-swappable module integrates seamlessly with Safety Manager and Experion PKS platforms via Fault Tolerant Ethernet.
Honeywell 51454416-800 Power Supply Module
The Honeywell 51454416-800 is a 200W fanless power supply module for Experion PKS and TDC 3000X systems. It provides +3.3V, +5V, +12V, and +24V DC rails with 2000V AC isolation. This ultra-reliable unit features six thermal sensors and supports operating temperatures from -30°C to +65°C.
Honeywell FC-SDIL-1608 V1.3 Digital Input Module
The Honeywell FC-SDIL-1608 V1.3 is a 16-channel safety digital input module. It provides isolated signal acquisition and advanced diagnostics for Safety Manager systems.
Honeywell CC-PAIN01 51410069-176 Analog Input Module
The Honeywell CC-PAIN01 (51410069-176) is a Series C analog input module for Experion PKS. It provides precise high-level signal acquisition and hot-swap capability for DCS applications.
Honeywell FS-SDO-0824 Safe Digital Output Module
The Honeywell FS-SDO-0824 is an 8-channel safety digital output module designed for Experion PKS and Safety Manager systems. This SIL 3-capable unit provides 24V DC fail-safe control for actuators, featuring wide-temperature operation and advanced loop diagnostics.
Honeywell 51202921-200 Analog Input Module
The Honeywell 51202921-200 is a professional Analog Input mounting plate for Experion PKS systems. This USA-made termination assembly supports stable signal processing in demanding industrial environments.
Honeywell FC-SICC-0001-L10 Interconnection Cable
The Honeywell FC-SICC-0001-L10 is a 0.38 kg high-performance interconnection cable for Experion PKS Safety Manager systems. It provides SIL3-capable data transmission between controllers and field termination units in critical industrial safety environments.
Honeywell 51202329-402 I/O Link Cable
The Honeywell 51202329-402 is an authentic I/O Link Cable for the Experion PKS system. This 0.12 kg high-speed interface cable ensures reliable data transmission between controllers and I/O modules in industrial DCS environments.
Honeywell 8C-PAIMA1Â 51454473-175 Analog Input Module
The Honeywell 8C-PAIMA1 (51454473-175) is a Series C Analog Input Module for the Experion PKS system. This 0.38 kg unit provides high-density signal processing and integrated diagnostics for precise industrial process control.
Honeywell 8C-PDIL51Â 51454359-175 Digital Input Module
The Honeywell 8C-PDIL51 (51454359-175) is a 24VDC Digital Input Module for Experion PKS Series C systems. This 0.3 kg module provides high-density discrete signal acquisition and real-time diagnostics for industrial DCS applications.
Honeywell 51195153-005 REV B VCN Drop Cable
The Honeywell 51195153-005 is a REV B VCN Drop Cable designed for the Experion PKS system. This 0.28 kg high-performance cable ensures reliable, shielded data transmission for industrial DCS network nodes.
Honeywell FC-PSU-240516 V1.0 Power Supply Unit Fail-Safe Systems
The Honeywell FC-PSU-240516 V1.0 provides a high-performance 16A power solution for safety-critical industrial control systems. It converts 24 VDC to a stable 5 VDC output to power Safety Manager logic modules reliably. Because it features a compact and durable USA-made design, this unit effectively maintains SIL-rated integrity in Emergency Shutdown and Fire & Gas applications.


























