You are here:
- Home
- Product
- I/O Modules
- Digital Input Modules
- Yokogawa ADV151-P50 S2 CENTUM VP Digital Input Module
SKU: ADV151-P50Â S2
Yokogawa ADV151-P50 S2 CENTUM VP Digital Input Module
The Yokogawa ADV151-P50 S2 is a 32-channel Digital Input Module for CENTUM VP systems. Featuring 24V DC isolated inputs and 1500V AC galvanic protection, it provides high-density, reliable status monitoring with dual-redundancy support for safety-critical industrial automation.
Technical Product Overview
The Yokogawa ADV151-P50 S2 functions as a high-reliability discrete input interface for the CENTUM VP and CENTUM CS 3000 integrated control systems. This 32-channel module captures status signals from field-side contact devices, such as switches and relays, and converts them into digital data for the system’s field control stations (FCS). By utilizing a 24V DC voltage sensing architecture, the ADV151-P50 S2 ensures stable signal acquisition across expansive industrial sites. The “S2” designation indicates a specific hardware revision or enhanced performance profile within Yokogawa’s modular lineup, designed to meet the rigorous demands of 24/7 continuous process automation.
Operational Characteristics and System Integration
This module optimizes process transparency through its high-density design and robust diagnostic capabilities. Because it manages 32 independent channels within a single slot, it significantly reduces the physical footprint required for I/O hardware. The ADV151-P50 S2 provides 1500V AC isolation between the field-side electronics and the internal system bus, protecting the central processor from external electrical surges. Furthermore, the module supports dual-redundant configurations; if the primary module fails, the secondary unit takes over control functions without any interruption to the process. To assist with troubleshooting, the unit features a status display on the front panel, allowing technicians to verify channel activity at a glance.
Comprehensive Technical Specifications
- Manufacturer:Â Yokogawa Electric Corporation
- Model Number:Â ADV151-P50 S2
- Product Series:Â CENTUM VP / CS 3000
- Module Type:Â Digital Input Module
- Number of Channels:Â 32 Channels (Isolated)
- Input Voltage:Â 24V DC (External Power Supply)
- Input Signal Type:Â Dry Contact (Sinking/Sourcing dependent on wiring)
- Isolation Voltage:Â 1500V AC between field and system
- Power Consumption:Â 2.5W typical
- Weight:Â 0.30 kg
- Connection Type:Â Pressure clamp or KS-cable interface
- Redundancy:Â Supports dual-redundant configuration
Strategic Industrial Applications
Facility managers and instrumentation engineers specify the ADV151-P50 S2 for critical process monitoring where data loss is not an option. Consequently, the module is widely deployed in:
- Petrochemical Refining:Â Tracks the status of manual isolation valves and safety interlocks throughout the plant.
- Power Plant Automation:Â Monitors auxiliary contact feedback from high-voltage circuit breakers and motor starters.
- Water Treatment Facilities:Â Captures level switch and overflow alerts to maintain automated hydraulic balance.
- Pharmaceutical Manufacturing:Â Provides high-density status tracking for cleanroom airlocks and environmental sensors.
You may also like
The Yokogawa AFV10D is a high-performance Duplexed Field Control Unit designed for the CENTUM VP DCS. It features redundant processor modules and high-speed Vnet/IP communication to ensure continuous process control and maximum reliability in critical industrial automation applications.
Yokogawa ADV561-P11Â S1 Digital Output Module
The Yokogawa ADV561-P11 S1 is a 64-channel digital output module for the CENTUM VP system. It offers high-density 24V DC control with optical isolation for process actuators. This module provides rapid response times and supports hot-swapping for continuous operation.
Yokogawa ADV151-P53Â S2 Digital Input Module
The Yokogawa ADV151-P53 S2 is a high-density 32-channel digital input module for CENTUM VP systems. It provides 24V DC isolated signal acquisition with advanced noise filtering. This durable, hot-swappable module ensures reliable status monitoring for critical industrial automation processes.
Yokogawa ADV159-P00 Digital Input Module
The Yokogawa ADV159-P00 is a 32-channel digital input module designed for the CENTUM VP system. It offers isolated signal acquisition, supports dual-redundancy, and features a hot-swappable design. This module ensures high-speed, reliable monitoring for critical industrial automation tasks.
Yokogawa ADV141-P12Â S1 Digital Input Module
The Yokogawa ADV141-P12 S1 is a 16-channel isolated digital input module for CENTUM VP systems. It features high-voltage opto-isolation, low power consumption, and hot-swap support. This Japan-made module ensures precise signal acquisition for demanding industrial control applications.
Yokogawa ADV561-P10 S1 Digital Output Module Centum VP
The Yokogawa ADV561-P10 S1 is a 64-channel 24VDC Digital Output module for Centum VP DCS. It delivers high-density, high-reliability control for solenoid valves and relays, featuring a wide operating temperature range and robust Japanese engineering.
Yokogawa ADV151-E63 S2 Digital Input Module Centum VP
The Yokogawa ADV151-E63 S2 is a 32-channel 24VDC Digital Input module designed for Centum VP DCS systems. Featuring high-density isolation and advanced diagnostics, it provides reliable discrete signal monitoring for critical industrial automation and safety loops.
Yokogawa CENTUM VP AFV10D S2 Duplexed Field Control Unit
The Yokogawa AFV10D S2 is a 19-inch rack-mountable Duplexed Field Control Unit for the CENTUM VP DCS. Featuring a 133 MHz processor and Vnet/IP compatibility, it provides high-speed, redundant process control. This Japan-manufactured unit ensures maximum system reliability with its 72-hour battery backup and robust dual-communication architecture.
Yokogawa ADV161-P50 S2 Digital Input Module for CENTUM VP
The Yokogawa ADV161-P50 S2 is a 64-channel high-density digital input module for the CENTUM VP DCS. Engineered for 24 VDC signals, this FIO module provides reliable, isolated data acquisition and a compact footprint for demanding industrial automation environments.
Yokogawa AAT145-S53 S1 CENTUM VP TC/mV Input Module
The Yokogawa AAT145-S53 S1 is a 16-channel Thermocouple and Millivolt Input Module for CENTUM VP systems. Offering 16-bit resolution, channel-to-channel isolation, and integrated burnout detection, it provides high-precision thermal monitoring with dual-redundancy support for mission-critical industrial processes.
Yokogawa ADV151-E60 S2 Digital Input Module
The Yokogawa ADV151-E60 S2 is a 32-channel, 24 VDC digital input module for CENTUM VP/CS 3000 systems. Featuring 1500V isolation, internal current sourcing for dry contacts, and dual-redundancy support, it provides high-density and reliable status monitoring for critical industrial field signals.
Yokogawa NFDV161-P01 S2 CENTUM VP 16-Channel Digital Input Module
The Yokogawa NFDV161-P01 S2 is a 16-channel, individually isolated Digital Input Module for CENTUM VP systems. Designed for 24 VDC signal monitoring, it offers high-speed status acquisition and supports dual-redundancy to ensure maximum reliability in critical industrial control and safety applications.


























