Hotline:

+8618059251527

About brand

FAQ

Contact

SKU: 330910-00-03-10-02-00

330910-00-03-10-02-00 | Bently Nevada | Proximity Probe

Overview

The 330910-00-03-10-02-00 is a high-quality Proximity Probe from Bently Nevada, designed for professional industrial automation and control systems.

Key Features

Industrial-grade reliability and performance
Designed for demanding environments
Compatible with Bently Nevada control systems
Brand new condition with full warranty

Technical Specifications

Parameter	Specification
Model Number	330910-00-03-10-02-00
Manufacturer	Bently Nevada
Product Type	Proximity Probe
Condition	Brand New

Applications

Industrial automation
Process control
Manufacturing systems

You may also like

Emerson DeltaV KJ4010X1-BG1 Localbus Right Extender — Emerson DeltaV KJ4010X1-BG1 Localbus Right Extender
Emerson DeltaV M-series Localbus Right Extender card (KJ4010X1-BG1 / 12P0830X072) for distributed control systems. Brand new original stock, fully verified with priority shipping options.

Emerson DeltaV KJ4010X1-BG1 Localbus Right Extender
Emerson DeltaV M-series Localbus Right Extender card (KJ4010X1-BG1 / 12P0830X072) for distributed control systems. Brand new original stock, fully verified with priority shipping options.

Emerson Ovation 1P00028G01 Remote Node Transition Panel — Emerson Ovation 1P00028G01 Remote Node Transition Panel
The Emerson Ovation 1P00028G01 Remote Node Transition Panel provides robust signal routing and high-integrity electrical isolation for legacy Ovation Distributed Control Systems (DCS). Operating at 220V AC across an ultra-wide temperature range of -40°C to +85°C, this compact transition panel eliminates field line noise and ensures reliable, deterministic peer-to-peer communication between remote I/O nodes and central controllers in demanding industrial environments.

Emerson Ovation 1P00028G01 Remote Node Transition Panel
The Emerson Ovation 1P00028G01 Remote Node Transition Panel provides robust signal routing and high-integrity electrical isolation for legacy Ovation Distributed Control Systems (DCS). Operating at 220V AC across an ultra-wide temperature range of -40°C to +85°C, this compact transition panel eliminates field line noise and ensures reliable, deterministic peer-to-peer communication between remote I/O nodes and central controllers in demanding industrial environments.

CI-10 ABB 3BHT300055R0001 RS-485 PLC Interface Module — CI-10 ABB 3BHT300055R0001 RS-485 PLC Interface Module
The ABB 3BHT300055R0001 CI-10 is a specialized communication interface board for UNITROL Excitation Systems. It provides robust RS-485 serial connectivity and high-speed data processing to ensure reliable generator control and seamless DCS integration.

CI-10 ABB 3BHT300055R0001 RS-485 PLC Interface Module
The ABB 3BHT300055R0001 CI-10 is a specialized communication interface board for UNITROL Excitation Systems. It provides robust RS-485 serial connectivity and high-speed data processing to ensure reliable generator control and seamless DCS integration.

ABB PCD235 A101 3BHE032025R0101 Exciter Control Module — ABB PCD235 A101 3BHE032025R0101 Exciter Control Module
The ABB PCD235 A101 3BHE032025R0101 is a high-precision Exciter Control Module for UNITROL systems. It features advanced PID algorithms and Modbus RTU support to ensure stable generator performance and seamless DCS integration in demanding power environments.

ABB PCD235 A101 3BHE032025R0101 Exciter Control Module
The ABB PCD235 A101 3BHE032025R0101 is a high-precision Exciter Control Module for UNITROL systems. It features advanced PID algorithms and Modbus RTU support to ensure stable generator performance and seamless DCS integration in demanding power environments.

21000-34-10-20-058-04-02 | Bently Nevada | Proximity Probe HousingAssemblies — 21000-34-10-20-058-04-02 | Bently Nevada | Proximity Probe HousingAssemblies
Technical Overview
The Bently Nevada 21000-34-10-20-058-04-02 is a rigid proximity probe housing assembly designed for the external mounting of proximity probes on machinery casings. Its primary function is to provide a secure, environmentally sealed, and mechanically protected housing for a non-contacting eddy current proximity probe. This specific assembly, constructed from 304 Stainless Steel, ensures robust performance in corrosive industrial environments. It positions a 3300 XL 8 mm probe at a fixed distance from the mounting surface, defined by its 3.4-inch standoff dimension. When integrated into a Bently Nevada 3500 Machinery Protection System, the probe within the 21000-34-10-20-058-04-02 housing measures shaft vibration and position. The probe transmits a high-frequency RF signal, which is modulated by the gap to the conductive target. This signal is then demodulated by a Proximitor sensor, producing a DC voltage proportional to the gap. This voltage is processed by a 3500 monitor module (e.g., 3500/42M) to provide critical data for machinery diagnostics and protection, such as radial vibration, axial thrust position, and speed.
Detailed Specifications
Parameter Specification
Manufacturer Bently Nevada
Part Number 21000-34-10-20-058-04-02
Product Type Proximity Probe Housing Assembly
Condition Brand New
Warranty 12 Months
Material of Construction 304 Stainless Steel
Mounting Thread Option 3/4 - 14 NPT
Standoff Adapter Dimension (A) 3.4 in (86 mm)
Housing Length (C) 5.8 in (147 mm)
Included Probe 3300 XL 8 mm Proximity Probe
Probe Cable Length (B) 2.0 m (6.6 ft)
Operating Temperature Range -34 °C to +177 °C (-29 °F to +350 °F), limited by probe/cable specifications
Operational Capabilities
In Oil & Gas and Power Generation applications, the 21000-34-10-20-058-04-02 housing assembly demonstrates high reliability in demanding operational conditions. Its 304 Stainless Steel construction provides excellent resistance to corrosion from process fluids, steam, and harsh atmospheric contaminants common in these industries. The rigid design ensures the probe's measurement gap remains stable, preventing measurement drift and false alarms, which is critical for the protection of high-speed turbomachinery. The 3/4 - 14 NPT mounting thread, when installed correctly with appropriate sealant, provides a secure, pressure-tight seal against machine casing pressures. This configuration is rated for hazardous area classifications when used with appropriate intrinsic safety barriers. The assembly's design minimizes susceptibility to mechanical shock and vibration, ensuring the integrity of the measurement signal path from the probe to the monitoring system for long-term, uninterrupted machinery protection.
Applications
Power generation turbines and generators
Oil & gas compressors and pumps
Industrial rotating machinery monitoring
Predictive maintenance systems
Process automation
Technical FAQ
Q: What systems is the 21000-34-10-20-058-04-02 compatible with?
A: The 21000-34-10-20-058-04-02 contains a 3300 XL 8 mm probe. This probe is a component of a complete transducer system that must also include a 3300 XL extension cable and a 3300 XL Proximitor Sensor. The complete transducer system is directly compatible with Bently Nevada monitoring systems, including the 3500 Series, 3300 Series, and the Orbit 60 Series. It provides a standard analog voltage signal (typically 2 to 18 Vdc or -2 to -18 Vdc) to the monitor's input module for processing.
Q: What are the installation requirements?
A: Installation requires a machined mounting boss on the machine case with a 3/4 - 14 NPT tapped hole. The surface of the boss must be perpendicular to the shaft centerline to ensure accurate measurement. Use an appropriate thread sealant (e.g., PTFE tape or liquid sealant rated for the process temperature and fluid) on the NPT threads to create a secure seal and prevent loosening. The assembly should be tightened to the specified torque value. After mechanical installation, the probe gap must be set by adjusting the probe within the housing to achieve the desired DC voltage, typically the center of its linear range (e.g., -10 Vdc for a standard 80 mil / 2 mm range), before locking it in place.

21000-34-10-20-058-04-02 | Bently Nevada | Proximity Probe HousingAssemblies
Technical Overview
The Bently Nevada 21000-34-10-20-058-04-02 is a rigid proximity probe housing assembly designed for the external mounting of proximity probes on machinery casings. Its primary function is to provide a secure, environmentally sealed, and mechanically protected housing for a non-contacting eddy current proximity probe. This specific assembly, constructed from 304 Stainless Steel, ensures robust performance in corrosive industrial environments. It positions a 3300 XL 8 mm probe at a fixed distance from the mounting surface, defined by its 3.4-inch standoff dimension. When integrated into a Bently Nevada 3500 Machinery Protection System, the probe within the 21000-34-10-20-058-04-02 housing measures shaft vibration and position. The probe transmits a high-frequency RF signal, which is modulated by the gap to the conductive target. This signal is then demodulated by a Proximitor sensor, producing a DC voltage proportional to the gap. This voltage is processed by a 3500 monitor module (e.g., 3500/42M) to provide critical data for machinery diagnostics and protection, such as radial vibration, axial thrust position, and speed.
Detailed Specifications
Parameter Specification
Manufacturer Bently Nevada
Part Number 21000-34-10-20-058-04-02
Product Type Proximity Probe Housing Assembly
Condition Brand New
Warranty 12 Months
Material of Construction 304 Stainless Steel
Mounting Thread Option 3/4 - 14 NPT
Standoff Adapter Dimension (A) 3.4 in (86 mm)
Housing Length (C) 5.8 in (147 mm)
Included Probe 3300 XL 8 mm Proximity Probe
Probe Cable Length (B) 2.0 m (6.6 ft)
Operating Temperature Range -34 °C to +177 °C (-29 °F to +350 °F), limited by probe/cable specifications
Operational Capabilities
In Oil & Gas and Power Generation applications, the 21000-34-10-20-058-04-02 housing assembly demonstrates high reliability in demanding operational conditions. Its 304 Stainless Steel construction provides excellent resistance to corrosion from process fluids, steam, and harsh atmospheric contaminants common in these industries. The rigid design ensures the probe's measurement gap remains stable, preventing measurement drift and false alarms, which is critical for the protection of high-speed turbomachinery. The 3/4 - 14 NPT mounting thread, when installed correctly with appropriate sealant, provides a secure, pressure-tight seal against machine casing pressures. This configuration is rated for hazardous area classifications when used with appropriate intrinsic safety barriers. The assembly's design minimizes susceptibility to mechanical shock and vibration, ensuring the integrity of the measurement signal path from the probe to the monitoring system for long-term, uninterrupted machinery protection.
Applications
Power generation turbines and generators
Oil & gas compressors and pumps
Industrial rotating machinery monitoring
Predictive maintenance systems
Process automation
Technical FAQ
Q: What systems is the 21000-34-10-20-058-04-02 compatible with?
A: The 21000-34-10-20-058-04-02 contains a 3300 XL 8 mm probe. This probe is a component of a complete transducer system that must also include a 3300 XL extension cable and a 3300 XL Proximitor Sensor. The complete transducer system is directly compatible with Bently Nevada monitoring systems, including the 3500 Series, 3300 Series, and the Orbit 60 Series. It provides a standard analog voltage signal (typically 2 to 18 Vdc or -2 to -18 Vdc) to the monitor's input module for processing.
Q: What are the installation requirements?
A: Installation requires a machined mounting boss on the machine case with a 3/4 - 14 NPT tapped hole. The surface of the boss must be perpendicular to the shaft centerline to ensure accurate measurement. Use an appropriate thread sealant (e.g., PTFE tape or liquid sealant rated for the process temperature and fluid) on the NPT threads to create a secure seal and prevent loosening. The assembly should be tightened to the specified torque value. After mechanical installation, the probe gap must be set by adjusting the probe within the housing to achieve the desired DC voltage, typically the center of its linear range (e.g., -10 Vdc for a standard 80 mil / 2 mm range), before locking it in place.

21504-00-32-10-02 | Bently Nevada | Vibration Probe — 21504-00-32-10-02 | Bently Nevada | Vibration Probe
Technical Overview
The Bently Nevada 21504-00-32-10-02 is a 3300 NSv series proximity vibration probe, a fundamental component of an eddy current transducer system designed for non-contact displacement and vibration measurement on rotating machinery. Its primary function is to measure the distance (gap) between the probe tip and a conductive target material, typically a machine shaft. The probe operates by generating a high-frequency radio frequency (RF) field from its tip coil. When brought near the conductive target, this field induces eddy currents on the target's surface. These eddy currents alter the impedance of the probe's coil system. This change in impedance is detected by an associated Proximitor Sensor, which demodulates the signal into a voltage directly proportional to the probe-to-target gap. This analog voltage signal is then transmitted to a monitoring system, such as the Bently Nevada 3500 Machinery Protection System, for real-time analysis, trending, and alarming. The 21504-00-32-10-02 is constructed with a stainless steel case for durability in industrial environments and is specifically configured with a 320 mm case length and a 1.0-meter integral cable.
Detailed Specifications
Parameter Specification
Manufacturer Bently Nevada
Part Number 21504-00-32-10-02
Product Type 3300 NSv Proximity Vibration Probe
Condition Brand New
Warranty 12 Months
Unthreaded Length 0 mm
Case Length 320 mm (12.6 in)
Total Length 1.0 metre (3.3 feet)
Connector Type Miniature coaxial ClickLoc connector, standard cable
Probe Tip Material Polyphenylene Sulfide (PPS)
Case Material AISI 304 Stainless Steel
System Linear Range 2 mm (80 mils)
System Scale Factor 7.87 V/mm (200 mV/mil) with 3300 NSv Proximitor
Operational Capabilities
In Oil & Gas and Power Generation applications, the 21504-00-32-10-02 probe demonstrates high reliability for continuous monitoring of critical assets such as gas and steam turbines, compressors, and large pump motors. Its non-contacting measurement principle eliminates mechanical wear, contributing to a high Mean Time Between Failures (MTBF) for the overall protection system. The probe is engineered to operate reliably in harsh industrial conditions. The probe tip is rated for continuous operation from -34 °C to +177 °C (-29 °F to +351 °F). The robust stainless steel case provides protection against physical impact and contaminants common in plant environments. When installed as part of a complete 3300 NSv transducer system, it provides a stable and repeatable measurement essential for machine protection and condition monitoring programs, enabling early detection of developing faults like imbalance, misalignment, and fluid-induced instabilities.
Applications
Power generation turbines and generators
Oil & gas compressors and pumps
Industrial rotating machinery monitoring
Predictive maintenance systems
Process automation
Technical FAQ
Q: What systems is the 21504-00-32-10-02 compatible with?
A: The 21504-00-32-10-02 probe is a component of the Bently Nevada 3300 NSv Proximity Transducer System. For correct operation, it must be used in conjunction with a 3300 NSv extension cable and a 3300 NSv Proximitor Sensor. The output from the Proximitor Sensor is compatible with Bently Nevada monitoring systems, including the 3500 and 3300 series, as well as any data acquisition system, PLC, or DCS capable of accepting a -24 Vdc powered, 7.87 V/mm (200 mV/mil) analog signal.
Q: What are the installation requirements?
A: Proper installation is critical for measurement accuracy. The probe must be mounted perpendicular to the target surface using a rigid bracket. The physical gap should be set to place the DC output voltage in the middle of the system's linear range, typically -10 Vdc. The target area on the shaft must be at least 10.7 mm (0.42 in) in diameter, smooth (0.4 to 0.8 µm / 16 to 32 µin rms), and free of any electrical or magnetic irregularities (e.g., chrome plating, magnetised spots). Cable routing must avoid high-voltage power lines and other sources of electromagnetic interference. All ClickLoc connectors must be fully engaged to ensure a secure connection.

21504-00-32-10-02 | Bently Nevada | Vibration Probe
Technical Overview
The Bently Nevada 21504-00-32-10-02 is a 3300 NSv series proximity vibration probe, a fundamental component of an eddy current transducer system designed for non-contact displacement and vibration measurement on rotating machinery. Its primary function is to measure the distance (gap) between the probe tip and a conductive target material, typically a machine shaft. The probe operates by generating a high-frequency radio frequency (RF) field from its tip coil. When brought near the conductive target, this field induces eddy currents on the target's surface. These eddy currents alter the impedance of the probe's coil system. This change in impedance is detected by an associated Proximitor Sensor, which demodulates the signal into a voltage directly proportional to the probe-to-target gap. This analog voltage signal is then transmitted to a monitoring system, such as the Bently Nevada 3500 Machinery Protection System, for real-time analysis, trending, and alarming. The 21504-00-32-10-02 is constructed with a stainless steel case for durability in industrial environments and is specifically configured with a 320 mm case length and a 1.0-meter integral cable.
Detailed Specifications
Parameter Specification
Manufacturer Bently Nevada
Part Number 21504-00-32-10-02
Product Type 3300 NSv Proximity Vibration Probe
Condition Brand New
Warranty 12 Months
Unthreaded Length 0 mm
Case Length 320 mm (12.6 in)
Total Length 1.0 metre (3.3 feet)
Connector Type Miniature coaxial ClickLoc connector, standard cable
Probe Tip Material Polyphenylene Sulfide (PPS)
Case Material AISI 304 Stainless Steel
System Linear Range 2 mm (80 mils)
System Scale Factor 7.87 V/mm (200 mV/mil) with 3300 NSv Proximitor
Operational Capabilities
In Oil & Gas and Power Generation applications, the 21504-00-32-10-02 probe demonstrates high reliability for continuous monitoring of critical assets such as gas and steam turbines, compressors, and large pump motors. Its non-contacting measurement principle eliminates mechanical wear, contributing to a high Mean Time Between Failures (MTBF) for the overall protection system. The probe is engineered to operate reliably in harsh industrial conditions. The probe tip is rated for continuous operation from -34 °C to +177 °C (-29 °F to +351 °F). The robust stainless steel case provides protection against physical impact and contaminants common in plant environments. When installed as part of a complete 3300 NSv transducer system, it provides a stable and repeatable measurement essential for machine protection and condition monitoring programs, enabling early detection of developing faults like imbalance, misalignment, and fluid-induced instabilities.
Applications
Power generation turbines and generators
Oil & gas compressors and pumps
Industrial rotating machinery monitoring
Predictive maintenance systems
Process automation
Technical FAQ
Q: What systems is the 21504-00-32-10-02 compatible with?
A: The 21504-00-32-10-02 probe is a component of the Bently Nevada 3300 NSv Proximity Transducer System. For correct operation, it must be used in conjunction with a 3300 NSv extension cable and a 3300 NSv Proximitor Sensor. The output from the Proximitor Sensor is compatible with Bently Nevada monitoring systems, including the 3500 and 3300 series, as well as any data acquisition system, PLC, or DCS capable of accepting a -24 Vdc powered, 7.87 V/mm (200 mV/mil) analog signal.
Q: What are the installation requirements?
A: Proper installation is critical for measurement accuracy. The probe must be mounted perpendicular to the target surface using a rigid bracket. The physical gap should be set to place the DC output voltage in the middle of the system's linear range, typically -10 Vdc. The target area on the shaft must be at least 10.7 mm (0.42 in) in diameter, smooth (0.4 to 0.8 µm / 16 to 32 µin rms), and free of any electrical or magnetic irregularities (e.g., chrome plating, magnetised spots). Cable routing must avoid high-voltage power lines and other sources of electromagnetic interference. All ClickLoc connectors must be fully engaged to ensure a secure connection.

330703-00-100-10-11-CN | Bently Nevada | 3300 XL 11 mm Proximity Probes — 330703-00-100-10-11-CN | Bently Nevada | 3300 XL 11 mm Proximity Probes
Technical Overview
The Bently Nevada 330703-00-100-10-11-CN is an 11 mm eddy current proximity probe designed for non-contact displacement and vibration measurement on rotating machinery. It functions as a core component of the 3300 XL 11 mm Transducer System, which also includes a matched extension cable and a 3300 XL 11 mm Proximitor Sensor. The system operates on the eddy current principle, where the Proximitor Sensor emits a high-frequency radio frequency (RF) signal through the probe and extension cable. This signal radiates from the probe tip, creating an electromagnetic field. When a conductive target, such as a machine shaft, enters this field, eddy currents are induced on its surface. These currents create a secondary magnetic field that opposes the primary field, causing a measurable change in the RF signal's impedance. The Proximitor Sensor demodulates this signal to produce a DC voltage directly proportional to the gap between the probe tip and the target surface. This analog voltage signal is then transmitted to a monitoring system, such as the Bently Nevada 3500 series, for real-time analysis of radial vibration, axial position, and shaft speed. The 330703-00-100-10-11-CN features a robust stainless steel case and a chemically resistant Polyphenylene Sulfide (PPS) tip, ensuring reliability in harsh industrial environments.
Detailed Specifications
Parameter Specification
Manufacturer Bently Nevada
Part Number 330703-00-100-10-11-CN
Product Type 3300 XL 11 mm Proximity Probe
Condition Brand New
Warranty 12 Months
Linear Range 4.0 mm (160 mils)
Scale Factor 2.00 mV/µm (50 mV/mil) ± 6.5%
Total Length 1.0 metre
Probe Tip Material Polyphenylene Sulfide (PPS)
Probe Case Material AISI 304 Stainless Steel
Connector Type Miniature coaxial ClickLoc™ connector, gold-plated
Agency Approval CN Ex (China Ex) for hazardous area installations
Operational Capabilities
The 330703-00-100-10-11-CN proximity probe is engineered for high reliability in demanding industrial applications, particularly within Oil & Gas and Power Generation sectors. Its 11 mm tip provides a larger linear measurement range and is well-suited for monitoring large shaft diameters or applications requiring a greater standoff distance. The probe's construction ensures operational integrity across a wide temperature range, with the probe tip rated for -51 °C to +177 °C (-60 °F to +351 °F). The 3300 XL system design provides enhanced immunity to radio frequency interference (RFI/EMI), minimizing the risk of signal corruption from nearby motors, generators, or radio sources. The gold-plated ClickLoc™ connector ensures a secure, corrosion-resistant connection that prevents intermittent signals caused by vibration. When installed and maintained according to manufacturer specifications, the system demonstrates high Mean Time Between Failures (MTBF) and is a critical component for machinery protection systems (MPS) and condition monitoring programs, compliant with standards such as API 670.
Applications
Steam and gas turbines for power generation
Large centrifugal and reciprocating compressors in oil & gas processing
Boiler feed water pumps and other critical pump applications
Large electric motors and generators
Gearboxes and other industrial rotating machinery with fluid-film bearings
Integration into predictive maintenance and machinery protection systems (MPS)
Axial (thrust) position and radial vibration monitoring
Technical FAQ
Q: What systems is the 330703-00-100-10-11-CN compatible with?
A: The 330703-00-100-10-11-CN probe must be used as part of a complete Bently Nevada 3300 XL 11 mm Transducer System. This requires a matching 3300 XL 11 mm Proximitor Sensor (e.g., part number 330780) and a 3300 XL 11 mm extension cable. It is not interchangeable with components from 5 mm or 8 mm transducer systems, as the scale factor and linear range are different. The complete transducer system provides a voltage output compatible with Bently Nevada monitoring systems, including the 3500 and 3300 series, as well as third-party PLCs, DCS, and data acquisition systems designed to accept a 3-wire, -24 Vdc powered eddy current probe input.
Q: What are the installation requirements?
A: Proper installation is critical for accurate measurements. The probe must be mounted perpendicular to the observed shaft surface using a rigid bracket. The target area on the shaft must be smooth (typically 0.4 to 0.8 µm / 16 to 32 µin Ra), free of chrome or other non-conductive plating, and clear of any residual magnetism or electrical runout. The probe must be gapped correctly by adjusting its distance to the shaft until the Proximitor Sensor output voltage is at the center of the linear range, typically -10.0 Vdc. The probe case locknut should be torqued to the specified value to prevent loosening. The integral cable and any extension cable should be secured to avoid strain on the connectors and routed away from high-voltage power cables to minimize interference.

330703-00-100-10-11-CN | Bently Nevada | 3300 XL 11 mm Proximity Probes
Technical Overview
The Bently Nevada 330703-00-100-10-11-CN is an 11 mm eddy current proximity probe designed for non-contact displacement and vibration measurement on rotating machinery. It functions as a core component of the 3300 XL 11 mm Transducer System, which also includes a matched extension cable and a 3300 XL 11 mm Proximitor Sensor. The system operates on the eddy current principle, where the Proximitor Sensor emits a high-frequency radio frequency (RF) signal through the probe and extension cable. This signal radiates from the probe tip, creating an electromagnetic field. When a conductive target, such as a machine shaft, enters this field, eddy currents are induced on its surface. These currents create a secondary magnetic field that opposes the primary field, causing a measurable change in the RF signal's impedance. The Proximitor Sensor demodulates this signal to produce a DC voltage directly proportional to the gap between the probe tip and the target surface. This analog voltage signal is then transmitted to a monitoring system, such as the Bently Nevada 3500 series, for real-time analysis of radial vibration, axial position, and shaft speed. The 330703-00-100-10-11-CN features a robust stainless steel case and a chemically resistant Polyphenylene Sulfide (PPS) tip, ensuring reliability in harsh industrial environments.
Detailed Specifications
Parameter Specification
Manufacturer Bently Nevada
Part Number 330703-00-100-10-11-CN
Product Type 3300 XL 11 mm Proximity Probe
Condition Brand New
Warranty 12 Months
Linear Range 4.0 mm (160 mils)
Scale Factor 2.00 mV/µm (50 mV/mil) ± 6.5%
Total Length 1.0 metre
Probe Tip Material Polyphenylene Sulfide (PPS)
Probe Case Material AISI 304 Stainless Steel
Connector Type Miniature coaxial ClickLoc™ connector, gold-plated
Agency Approval CN Ex (China Ex) for hazardous area installations
Operational Capabilities
The 330703-00-100-10-11-CN proximity probe is engineered for high reliability in demanding industrial applications, particularly within Oil & Gas and Power Generation sectors. Its 11 mm tip provides a larger linear measurement range and is well-suited for monitoring large shaft diameters or applications requiring a greater standoff distance. The probe's construction ensures operational integrity across a wide temperature range, with the probe tip rated for -51 °C to +177 °C (-60 °F to +351 °F). The 3300 XL system design provides enhanced immunity to radio frequency interference (RFI/EMI), minimizing the risk of signal corruption from nearby motors, generators, or radio sources. The gold-plated ClickLoc™ connector ensures a secure, corrosion-resistant connection that prevents intermittent signals caused by vibration. When installed and maintained according to manufacturer specifications, the system demonstrates high Mean Time Between Failures (MTBF) and is a critical component for machinery protection systems (MPS) and condition monitoring programs, compliant with standards such as API 670.
Applications
Steam and gas turbines for power generation
Large centrifugal and reciprocating compressors in oil & gas processing
Boiler feed water pumps and other critical pump applications
Large electric motors and generators
Gearboxes and other industrial rotating machinery with fluid-film bearings
Integration into predictive maintenance and machinery protection systems (MPS)
Axial (thrust) position and radial vibration monitoring
Technical FAQ
Q: What systems is the 330703-00-100-10-11-CN compatible with?
A: The 330703-00-100-10-11-CN probe must be used as part of a complete Bently Nevada 3300 XL 11 mm Transducer System. This requires a matching 3300 XL 11 mm Proximitor Sensor (e.g., part number 330780) and a 3300 XL 11 mm extension cable. It is not interchangeable with components from 5 mm or 8 mm transducer systems, as the scale factor and linear range are different. The complete transducer system provides a voltage output compatible with Bently Nevada monitoring systems, including the 3500 and 3300 series, as well as third-party PLCs, DCS, and data acquisition systems designed to accept a 3-wire, -24 Vdc powered eddy current probe input.
Q: What are the installation requirements?
A: Proper installation is critical for accurate measurements. The probe must be mounted perpendicular to the observed shaft surface using a rigid bracket. The target area on the shaft must be smooth (typically 0.4 to 0.8 µm / 16 to 32 µin Ra), free of chrome or other non-conductive plating, and clear of any residual magnetism or electrical runout. The probe must be gapped correctly by adjusting its distance to the shaft until the Proximitor Sensor output voltage is at the center of the linear range, typically -10.0 Vdc. The probe case locknut should be torqued to the specified value to prevent loosening. The integral cable and any extension cable should be secured to avoid strain on the connectors and routed away from high-voltage power cables to minimize interference.

ABB HESG435737P2 HESG324490R1/E 316NG65 Power Supply Module — ABB HESG435737P2 HESG324490R1/E 316NG65 Power Supply Module
The ABB HESG435737P2 is a high-reliability power supply module for Procontrol P13 DCS systems. It provides stabilized power distribution for HESG324490R1/E and 316NG65 hardware, featuring advanced thermal management and Swedish engineering for demanding industrial environments.

ABB HESG435737P2 HESG324490R1/E 316NG65 Power Supply Module
The ABB HESG435737P2 is a high-reliability power supply module for Procontrol P13 DCS systems. It provides stabilized power distribution for HESG324490R1/E and 316NG65 hardware, featuring advanced thermal management and Swedish engineering for demanding industrial environments.

Honeywell Experion PKS 51307038-100 Power Control Module — Honeywell Experion PKS 51307038-100 Power Control Module
The Honeywell 51307038-100 is a dedicated Power Control Module for the Experion PKS series. It provides stable voltage regulation and integrated diagnostic reporting to ensure the reliability of industrial DCS hardware.

Honeywell Experion PKS 51307038-100 Power Control Module
The Honeywell 51307038-100 is a dedicated Power Control Module for the Experion PKS series. It provides stable voltage regulation and integrated diagnostic reporting to ensure the reliability of industrial DCS hardware.

Siemens 6DR4004-8D SIPART PS2 Positioner Mounting Kit — Siemens 6DR4004-8D SIPART PS2 Positioner Mounting Kit
The Siemens 6DR4004-8D is a universal stainless steel mounting kit designed for SIPART PS2 positioners. It complies with NAMUR IEC 60534-6-1 standards for linear actuators, providing a precise and vibration-resistant mechanical link for valve strokes ranging from 3 mm to 35 mm.

Siemens 6DR4004-8D SIPART PS2 Positioner Mounting Kit
The Siemens 6DR4004-8D is a universal stainless steel mounting kit designed for SIPART PS2 positioners. It complies with NAMUR IEC 60534-6-1 standards for linear actuators, providing a precise and vibration-resistant mechanical link for valve strokes ranging from 3 mm to 35 mm.

ICS Triplex T3310 Trusted I/O Transceiver Module — ICS Triplex T3310 Trusted I/O Transceiver Module
The ICS Triplex T3310 is a high-integrity I/O Transceiver for the Trusted TMR system. It manages high-speed data synchronization between the controller and I/O racks, providing the fault-tolerant communication required for SIL 3 rated safety applications.

ICS Triplex T3310 Trusted I/O Transceiver Module
The ICS Triplex T3310 is a high-integrity I/O Transceiver for the Trusted TMR system. It manages high-speed data synchronization between the controller and I/O racks, providing the fault-tolerant communication required for SIL 3 rated safety applications.

Bently Nevada 330104-00-14-10-11-00 Proximity Probes — Bently Nevada 330104-00-14-10-11-00 Proximity Probes
Technical Overview
The Bently Nevada 330104-00-14-10-11-00 Proximity Probes is a genuine industrial component.
Specifications
Condition New

Bently Nevada 330104-00-14-10-11-00 Proximity Probes
Technical Overview
The Bently Nevada 330104-00-14-10-11-00 Proximity Probes is a genuine industrial component.
Specifications
Condition New