You are here:
  1. Home
  2. Product
  3. I/O Modules
  4. Analog Output Modules
  5. Siemens SIMATIC DP 6ES7135-4GB01-0AB0 ET 200S Analog Output Module
Sale!
SKU: 6ES7135-4GB01-0AB0

Siemens SIMATIC DP 6ES7135-4GB01-0AB0 ET 200S Analog Output Module

The Siemens 6ES7135-4GB01-0AB0 is a 2-channel analog output module for the ET 200S distributed I/O system. It provides high-precision current signals (4-20mA/±20mA) with 13-bit resolution and a sub-1ms cycle time, ensuring reliable and deterministic control for industrial actuators and valves.

Request a Quote

Technical Overview
The Siemens 6ES7135-4GB01-0AB0 is a 2-channel analog output current module for the SIMATIC ET 200S distributed I/O system. It converts PLC digital values into precise industrial current signals for controlling analog field devices such as drives, valves, and dampers. The slim 15 mm design enables high-density installations without compromising real-time performance.

Key Specifications

  • Brand: Siemens
  • Series: SIMATIC ET 200S
  • Model: 6ES7135-4GB01-0AB0
  • Module Type: 2 AO I (Analog Output – Current)
  • Channels: 2 isolated outputs
  • Signal Ranges: 4–20 mA, ±20 mA
  • Resolution: 13-bit + sign
  • Cycle Time: < 1 ms
  • Isolation: Galvanic isolation between bus and load
  • Diagnostics: SF LED, wire break and short-circuit detection
  • Hot-Swap: Supported

Functionality and Applications
The module uses a high-resolution DAC to deliver stable, noise-resistant current outputs with fast response for closed-loop control. Integrated diagnostics and hot-swapping improve system availability and maintenance efficiency. It is widely used in process automation, including chemical, pharmaceutical, and water treatment industries, and integrates seamlessly with STEP 7 and TIA Portal.

Tags:

You may also like

Sale!
Allen Bradley 1756-OF8 ControlLogix Analog Output Module

Allen Bradley 1756-OF8 ControlLogix Analog Output Module

Configured for multi-channel analog signal generation in ControlLogix automation platforms, the Allen Bradley 1756-OF8 (1756-OF8 Analog Output Module) provides direct electrical execution of voltage and current control loops.

Hardware Specifications

ParameterSpecification
Model1756-OF8
BrandAllen Bradley
OriginUSA
Weight0.35 kg
Dimensions23.3 x 18.3 x 5.3 cm
Operating TempIndustrial Standard
Power ConsumptionSystem Backplane Dependent
Output Channels8 Points

Industrial Control and Network Characteristics

The 1756-OF8 module utilizes backplane bus communication velocity to process high-resolution analog output signals within the ControlLogix chassis. Integration into Profinet and EtherNet/IP deterministic networks enables synchronous command execution across distributed I/O racks. Firmware flash compatibility allows for version alignment with current control software, while configurable I/O density scaling supports expansion in modular automation architectures without degrading signal update rates.

Frequently Asked Questions

Q: Does the 1756-OF8 support Removal and Insertion Under Power (RIUP)?A: Yes, the module supports RIUP within a ControlLogix chassis, provided that the associated field wiring arm is secured correctly and the system is operating within defined environmental limits.Q: How is the channel isolation configured for this module?A: The 1756-OF8 utilizes internal galvanic isolation between the backplane and the I/O channels. No external isolation is required for standard loop power configurations, though ground referencing must be verified to prevent common-mode noise.

Field Installation Guidelines

  1. Ensure the ControlLogix chassis power is isolated before initiating module insertion.
  2. Align the module keying to the chassis slot to prevent incorrect installation.
  3. Slide the 1756-OF8 into the chassis until the backplane connector is fully engaged.
  4. Secure the module using the top and bottom latching mechanisms.
  5. Terminate field wiring to the Removable Terminal Block (RTB) according to the specific voltage or current loop wiring diagram (0-10 V or 4-20 mA).
  6. Verify shield termination at the cabinet entry point to suppress electromagnetic interference before energizing the chassis.
Sale!
Yokogawa ADR541-P10 S1 Analog Output Module

Yokogawa ADR541-P10 S1 Analog Output Module

The Yokogawa ADR541-P10 S1 is a 16-channel analog output module designed for the CENTUM VP DCS. It features PWM and time-proportional control, providing precise signal management for field devices in demanding industrial automation environments.
Sale!
Allen-Bradley 1756-OF6VI Isolated Analog Output Module

Allen-Bradley 1756-OF6VI Isolated Analog Output Module

The Allen-Bradley 1756-OF6VI is a 6-channel isolated analog voltage output module for ControlLogix systems. It features 13-bit resolution and 250V channel-to-channel isolation. This module provides precise ±10V control for actuators and drives in demanding industrial environments.
Sale!
Allen Bradley 1771-OFE1 Analog Output Module

Allen Bradley 1771-OFE1 Analog Output Module

The Allen Bradley 1771-OFE1 is a 4-channel analog voltage output module for PLC-5 systems. It provides 12-bit resolution across 0-10V, 1-5V, and ±10V ranges. This single-slot module features 1500V isolation and integrated short-circuit protection for reliable industrial control.
Sale!
Triconex 3806E Triple Modular Redundant Analog Output Module

Triconex 3806E Triple Modular Redundant Analog Output Module

The Triconex 3806E is a TMR Analog Output module providing SIL 3 rated performance for critical industrial control. Featuring 4-20 mA and 20-320 mA support, it ensures high-precision signal accuracy and fault-tolerant operation in DCS and SIS environments. This module includes advanced self-diagnostics and channel isolation for maximum system reliability
Sale!
Yokogawa AAI543-H50 S1 Analog Output Module

Yokogawa AAI543-H50 S1 Analog Output Module

The Yokogawa AAI543-H50 S1 is a 16-channel analog output module featuring HART 7 communication and ±0.1% accuracy. Designed for CENTUM VP systems, this 4-20mA current output module offers high-density control and robust isolation for critical industrial actuators and valves.
Sale!
HIMA F6705 Analog Output Safety Module

HIMA F6705 Analog Output Safety Module

The HIMA F6705 is a high-integrity 2-channel analog output module designed for H41q and H51q safety systems. It provides precise D/A conversion and supports output loads up to 500 mA, ensuring reliable control of valves and actuators in mission-critical industrial applications.
Sale!
Yokogawa ADR541-P11 S1 Analog Output Module CENTUM VP DCS

Yokogawa ADR541-P11 S1 Analog Output Module CENTUM VP DCS

The Yokogawa ADR541-P11 S1 is a 16-channel analog output module designed for the CENTUM VP DCS. It delivers precise modulating control for valves and actuators through advanced signal conversion and robust electrical isolation. This brand-new Japan-made module ensures process stability and easy integration into complex industrial automation systems.
Sale!
General Electric DS3800NDAC1D1E Analog Output Circuit Board Mark IV Speedtronic

General Electric DS3800NDAC1D1E Analog Output Circuit Board Mark IV Speedtronic

The General Electric DS3800NDAC1D1E is a precision Analog Output (DACO) board for the Mark IV Speedtronic turbine control system. Featuring adjustable 4-20mA outputs and onboard diagnostic test points, it provides a ruggedized and stable interface for controlling critical turbine fuel valves and positioning actuators.