You are here:
- Home
- Product
- I/O Modules
- Analog Output Modules
- Allen-Bradley 1769-OF4 CompactLogix Analog Output Module
SKU: 1769-OF4
Allen-Bradley 1769-OF4 CompactLogix Analog Output Module
The Allen-Bradley 1769-OF4 is a 4-channel analog output module for CompactLogix and MicroLogix 1500 systems. Equipped with 15-bit resolution and support for both voltage and current signals, it provides precise control for VFDs and actuators in industrial environments.
Functional Performance
The Allen-Bradley 1769-OF4 serves as a high-precision analog output interface within the CompactLogix and MicroLogix 1500 controller families. By providing four independent voltage or current channels, this module enables the PLC to command external devices such as variable frequency drives (VFDs), control valves, and actuators. To ensure operational accuracy, the unit utilizes advanced 15-bit resolution to deliver fine-tuned adjustments to the field process. Furthermore, the module communicates directly over the 1769 Compact I/O bus, ensuring high-speed data synchronization and deterministic control for critical automation loops.
Operational Characteristics
- Maximizes Signal Versatility: Each of the four channels allows for individual configuration of voltage (±10V, 0–10V, 0–5V, 1–5V) or current (0–20mA, 4–20mA) ranges. As a result, engineers can interface with a wide variety of industrial hardware using a single module type.
- Enhances System Protection: The module incorporates comprehensive galvanic isolation between the backplane and the output channels. In doing so, it prevents electrical noise and ground loops from compromising the central processor’s stability.
- Simplifies Real-Time Monitoring: The 1769-OF4 performs continuous self-diagnostics and reports open-circuit or short-circuit faults back to the controller. Consequently, maintenance teams can identify field-side wiring issues immediately through the software interface.
- Streamlines Hardware Maintenance: Because the module supports a removable terminal block (RTB), technicians can replace the unit without disconnecting individual field wires. This feature effectively reduces downtime during routine hardware upgrades or emergency repairs.
- Optimizes Space Efficiency: The compact, rackless design allows for high-density mounting on a standard DIN rail. Therefore, it provides a robust I/O solution for space-constrained control cabinets without sacrificing industrial-grade performance.
Technical Specifications
- Catalog Number: 1769-OF4
- Product Series: Compact I/O
- Output Type: Analog (Voltage and Current)
- Number of Channels: 4 (Isolated from backplane)
- Resolution: 15 bits plus sign
- Voltage Ranges: ±10V, 0–10V, 0–5V, 1–5V
- Current Ranges: 0–20 mA, 4–20 mA
- Conversion Rate: 2.5 ms (Typical for all channels)
- Backplane Current: 120 mA at 5.1V / 120 mA at 24V
- Bus Current Draw: 2.9 W
- Operating Temperature: 0 °C to +60 °C
- Mounting: DIN Rail or Panel Mount
You may also like
Allen-Bradley 1756-SIM hardware discrete simulator module for ControlLogix chassis. Ideal for physical PLC code bench testing and logic verification.
Allen-Bradley 2094-BM02-S Servo Drive Axis Module
The Allen-Bradley 2094-BM02-S, also cataloged as the 2094-BM02-S Servo Drive, operates as a dedicated hardware component for multi-axis motion control execution within ControlLogix platforms. The hardware acts as a modular inverter node mounted directly onto a shared integrated power rail system. It modulates raw DC link energy into high-frequency pulse-width modulation (PWM) power vectors to regulate the angular positioning, velocity, and torque outputs of synchronized permanent magnet synchronous motors.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 2094-BM02-S |
| Brand | Allen-Bradley |
| Origin | USA |
| Weight | 0.9 kg |
| Dimensions | 3.5 x 13 x 14.5 cm |
| Operating Temp | 0 to +50 deg C (Standard Industrial Range) |
| Power Consumption | 650 VDC nominal input / 115 Ohm internal shunt resistor |
| Module Type | Servo Drive (Axis Module) |
| Product Range | ControlLogix / Kinetix 6000 |
| System Classification | PLC Motion Control |
| Continuous Current | 10.3 A (RMS), 14.6 A (Sine Peak) |
| Velocity Loop Bandwidth | 500 Hz |
| Current Loop Frequency | 1300 Hz |
| Efficiency Rating | 98% |
Industrial Control & Deterministic Driving Network
The Allen-Bradley 2094-BM02-S interacts directly over backplane bus communication velocity networks to achieve microsecond-level synchronization across adjacent drive modules. The hardware features deterministic network compatibility, letting control processors command motion trajectories with minimal jitter. It supports peak enhancement technology, scaling the nominal inverter output profile from a standard 150% threshold up to 250% during peak torque demands. This scaling permits rapid rotor acceleration and deceleration profiles without triggering overcurrent trips. Integrated Safe-Torque Off (STO) hardware circuits provide independent physical galvanic control paths, disabling gating signals to the output power transistors to prevent unexpected motor rotation during active maintenance states.Frequently Asked Questions
Q: What are the backplane current and configuration limits when expanding axis modules on a single rail?A: The module must be inserted into an authorized Kinetix 6000 power rail, supporting up to seven axis modules alongside one master power module. The cumulative peak current draw must not exceed the structural rating of the shared copper backplane link.Q: Is this hardware compatible with live hot-swapping procedures?A: No. The shared 650 VDC bus lines pose arc-flash and component damage hazards. System DC bus voltage must be entirely drained and verified below safe thresholds before seating or unseating the module from the rail structure.Q: Can the internal 115 Ohm shunt resistor handle high-inertia braking loads?A: The internal shunt resistor is designed for short-duration thermal dissipation. High-inertia or cyclic deceleration applications require an external, isolated shunt module to prevent DC bus overvoltage faults.Field Installation Guidelines
- Enclosure Clearance & Thermal Profile: Maintain a minimum enclosure installation depth of 10.7 inches. Ensure unimpeded vertical ventilation spacing above and below the module chassis to prevent heat sink thermal saturation.
- Cable Separation Architecture: Physically isolate unshielded high-voltage power cables, including motor leads and shunt resistor lines, from low-level digital feedback encoder loops and communication wires to suppress cross-talk.
- Shielding and Ground Boundary: Terminate all motor cable shields at the designated grounding clamp on the power rail base. Maintain a low-impedance ground plane across the entire mounting subpanel.
- Overcurrent Protection: Install specified circuit breakers or high-speed semiconductor fuses upstream of the main power distribution block to guard the internal solid-state components against phase-to-phase short circuits.
Allen-Bradley 1756-L65 ControlLogix 5565 Programmable Automation Controller
The Allen-Bradley 1756-L65 is a high-performance ControlLogix controller offering 32 MB of memory and extensive I/O scalability for complex industrial applications.
Allen-Bradley 1756-EN2T ControlLogix EtherNet/IP Communication Bridge Module
The Allen-Bradley 1756-EN2T is a Fast Ethernet communication bridge for ControlLogix networks that handles 256 Logix and 128 TCP/IP connections. This single-slot module enables 10/100 Mbps data transfers, supports CIP Safety and 8 axes of integrated motion, and integrates easily into standard 1756 chassis.
Allen-Bradley 1756-OA16 ControlLogix 16-Point AC Digital Output Module
The Allen-Bradley 1756-OA16 is a 16-point discrete AC output module for ControlLogix systems. It provides reliable 74-265V AC switching with integrated diagnostics, 0.5A per point capacity, and robust thermal performance for industrial automation.
Allen-Bradley 1756-L63XT ControlLogix-XT Logix5563 Processor
The Allen-Bradley 1756-L63XT is a Logix5563 XT processor. It offers 8MB memory and an extended -25°C to 70°C operating range for extreme environments.
Allen-Bradley 1756-CN2R ControlNet Communication Module
The Allen-Bradley 1756-CN2R is a high-performance ControlNet bridge for ControlLogix systems. It supports 128 connections and redundant media for maximum uptime. This 5 Mbps module ensures deterministic data delivery for complex industrial automation networks.
Allen-Bradley 1756-CNBR ControlLogix Communication Module
The Allen-Bradley 1756-CNBR is a redundant ControlNet bridge module for ControlLogix systems. It provides 5 Mbps deterministic communication and dual BNC ports for media redundancy. This module supports up to 64 connections and 99 nodes in mission-critical automation environments.
Allen-Bradley 1756-L62 ControlLogix Logix5562 Processor
The Allen-Bradley 1756-L62 is a Logix5562 processor featuring 4 MB of user memory and 128,000 I/O capacity. This ControlLogix module supports 32 tasks and redundancy for high-availability industrial control. It remains a reliable solution for maintaining legacy factory automation systems.
Allen-Bradley 1756-IT6I2 ControlLogix Analog Input Module
The Allen-Bradley 1756-IT6I2 is a 6-channel isolated thermocouple input module for ControlLogix systems. It features 16-bit resolution, support for 11 thermocouple types, and dual CJC inputs for precise industrial temperature measurement and monitoring.
Allen-Bradley MOX12/4U-P3509B 80026-173-23 Control Power Supply
The Allen-Bradley MOX12/4U-P3509B 80026-173-23 is a 350W industrial control power supply providing a stable 12V DC output. Designed for frequency converters and PLC systems, it features comprehensive overload protection and a high-efficiency, compact design.
Allen-Bradley 1756-L55M12 Controller Processor
The Allen-Bradley 1756-L55M12 is a Logix5555 controller with 750KB of user memory. It supports multi-network communication including EtherNet/IP and ControlNet for high-performance automation.


























