You are here:
- Home
- Product
- I/O Modules
- Analog Input Modules
- Triconex AI3281 Analog Input Module for TMR Safety Systems
SKU: AI3281
Triconex AI3281 Analog Input Module for TMR Safety Systems
The Triconex AI3281 is a 32-point TMR analog input module designed for 4-20mA signal acquisition in safety-critical DCS environments. This SIL 3 certified module provides high-accuracy data processing and fault-tolerant operation for demanding oil, gas, and power applications
High-Integrity Data Acquisition
The Triconex AI3281 is a precision-engineered analog input module specifically developed for Triple Modular Redundancy (TMR) architectures. This module serves as the primary interface for safety-critical data acquisition, capturing signals from field sensors and translating them into actionable data for the Tricon controller. Because the module utilizes a TMR voting mechanism, it provides the fault tolerance necessary to eliminate single points of failure, making it a cornerstone of Safety Instrumented Systems (SIS).
Signal Processing and Accuracy
This module specializes in managing the 4–20 mA current loops typically found in industrial instrumentation. The AI3281 employs advanced filtering and high-resolution analog-to-digital conversion to ensure that process variables—such as pressure, temperature, and flow—are recorded with extreme accuracy. Furthermore, the module continuously performs self-diagnostic routines to detect and report any internal hardware discrepancies or field-side wiring faults, maintaining the integrity of the safety loop at all times.
Industrial Reliability and Certification
Triconex designed the AI3281 to perform reliably in the demanding environments of petrochemical plants, refineries, and power generation facilities. The hardware features a ruggedized mechanical design that resists vibration and electrical noise. Due to its compliance with international functional safety standards, the module carries TUV certification for use in SIL 3 (Safety Integrity Level) applications. Its modular hot-swap capability allows technicians to replace units without interrupting the control process, significantly enhancing plant availability.
Technical Specifications
- Brand: Schneider Electric Triconex
- Model: AI3281
- Product Category: Analog Input Module
- System Architecture: Triple Modular Redundancy (TMR)
- Input Channels: 32 Isolated Points
- Input Signal Range: 4–20 mA DC
- Resolution: 12-bit or higher (Application dependent)
- Diagnostics: Comprehensive internal and field-side monitoring
- Certification: SIL 3, TUV, UL, CE, CSA
- Dimensions: 2.2 cm x 35.6 cm x 35.0 cm
- Weight: 1.74 kg
- Origin: USA
Key Application Benefits
- Eliminates process downtime through TMR fault-tolerant voting
- Enhances operational safety by maintaining strict signal accuracy for ESD systems
- Simplifies maintenance with “Hot-Swap” online replacement functionality
- Supports high-density configurations to optimize control cabinet space
You may also like
The Emerson KJ3002X1-BG2 (12P1731X062) is a DeltaV M-series Analog Input card for thermocouple and millivolt signals. It features high-precision data acquisition and redundancy support for industrial DCS applications.
Emerson KJ3222X1-BK1 12P4705X032 SE4003S2B1 Analog Input Module
The Emerson KJ3222X1-BK1 is an 8-channel DeltaV analog input module. It provides 24-bit resolution for 4-20mA signals in M-series I/O subsystems.
General Electric IS210WETAH1A Analog Input Module
The GE IS210WETAH1A is a high-performance Analog Input Module designed for Mark VIe DCS environments. It features a 100 MHz 486 processor, 8 MB of DRAM, and integrated Ethernet connectivity for precise industrial turbine control and monitoring.
Emerson 5X00070G04 Analog Input Module
The Emerson 5X00070G04 is a 14-bit, 8-channel analog input module designed for the Ovation Distributed Control System. It provides high-precision signal processing for low-level industrial inputs in power and process manufacturing environments.
General Electric IC200ALG266F Analog Input Module
The GE IC200ALG266F is a 15-channel, 15-bit analog current input module for VersaMax I/O. It supports 4-20mA and 0-20mA ranges with 30VDC overvoltage protection. Featuring TUV certification and open-wire detection, this high-density module provides precise diagnostics and fault isolation for critical industrial automation and DCS systems.
Emerson KJ3222X1-BA1 12P2532X122 VE4003S2B3 Analog Input Module
The Emerson KJ3222X1-BA1 12P2532X122 is a high-performance DeltaV Analog Input Module. It features a VE4003S2B3 mass termination block for precise 4-20mA signal acquisition. This rugged M-series I/O module ensures real-time data accuracy and advanced diagnostics for DCS applications.
Allen-Bradley 1756-IT6I2 ControlLogix Analog Input Module
The Allen-Bradley 1756-IT6I2 is a 6-channel isolated thermocouple input module for ControlLogix systems. It features 16-bit resolution, support for 11 thermocouple types, and dual CJC inputs for precise industrial temperature measurement and monitoring.
ICS Triplex T9432 Analog Input Module
The ICS Triplex T9432 is a 16-channel isolated analog input module for the AADvance system. It supports 0-24mA signals with advanced line monitoring and diagnostic capabilities for safety-critical industrial automation.
Yokogawa SAI143-H33 S2 Analog Input Module
The Yokogawa SAI143-H33 S2 is a 16-channel analog input module designed for CENTUM VP and ProSafe-RS systems. It features full channel isolation, LED diagnostics, and 4-20mA support for high-integrity process control.
Allen-Bradley 1771-IFE Analog Input Module
Enhance your PLC-5 system with the Allen-Bradley 1771-IFE. This 16-channel analog input module provides high-precision signal conversion, optical isolation, and support for voltage/current inputs.
Yokogawa AAI143-S00 S1 Analog Input Module
The Yokogawa AAI143-S00 S1 is a 16-channel isolated analog input module designed for 4-20 mA signal acquisition in CENTUM VP systems. It features high-performance signal conditioning, 1500V AC isolation, and a hot-swappable design to ensure maximum reliability and uptime for critical industrial process control.
Yokogawa AAI143-S53 S1 Analog Input Module
The Yokogawa AAI143-S53 S1 is a 16-channel, isolated 4-20 mA analog input module for CENTUM VP/CS 3000 systems. Featuring 1500V isolation, G3 conformal coating, and dual-redundancy support, it provides high-precision signal conversion and reliable monitoring for critical industrial process control.























